Jump to content
SAU Community

Recommended Posts

I've hit kerbs running 195 on 10inch (see pic below), bent the rim and the tyre hasn't popped off. If you manage to pop any tyre off any rim then please teach me how to do it.

Teach you? Your already well on the way.

That is the stupidest thing I have ever seen.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

I've hit kerbs running 195 on 10inch (see pic below), bent the rim and the tyre hasn't popped off.

are those 15's? you've got a huge sidewall, so it'll have more give in it. lot harder to do that on lower profile tyres.

the way tyres are designed these days with dual locking bands etc, its a lot harder to pop em off.

hell i've run my tyre at 12PSI in a lap around a track and it didn't pop off. did get told off for not checking tyre pressures before goin out when I came into pits and complained about car not handling properly :)

sometime you will notice some tires will give a more stretched look than other tires of the same size on the same rim.

this is obviously caused by the design of the tire, more specifically the rim protector im assuming.

what i would like to know from your experiance, what model tire gives the best stretched look???

i like the bridgestone potenza re40- agressive side wall protector

also some falkens lok nice stretched

anymore guys? maybe even some pics of your stretched look skylines?

No doubt you need this to compliment your fully sic uleh bov sound. :)

I've hit kerbs running 195 on 10inch (see pic below), bent the rim and the tyre hasn't popped off. If you manage to pop any tyre off any rim then please teach me how to do it.

that's a lot of stretch, but a 195/60 14 on a 14X10 is one thing, but getting say a low profile 17 in that width (if they even make them) onto a 10 is a recipe for disaster.

Stretched tyres are the latest gay thing to do. Buy proper sized tyres and you will get better traction/grip.

Drifting is the only reason to stretch tyres.

Stretching isn't a recent thing at all mate, been going on for years. And another good reason for doing it is so you can fit huge dished rims on a car so low that scrapes on man holes. Read up about 1980s Japanese 'Zokusha'.

that's a lot of stretch, but a 195/60 14 on a 14X10 is one thing, but getting say a low profile 17 in that width (if they even make them) onto a 10 is a recipe for disaster.

Yea 195/60/14 gives you a bit of tyre wall to play with. I recon you would have a hard time getting the air into a 195 low profile on a 17, it just wouldn't seal.

Stretching isn't a recent thing at all mate, been going on for years. And another good reason for doing it is so you can fit huge dished rims on a car so low that scrapes on man holes. Read up about 1980s Japanese 'Zokusha'.

Why not just get rims that fit the car in the first place?

You boys are thinking backwards. You make the car fit the wheels. :P

Zokusha is kinda like the ute culture in Aus. Feral. :(

http://jp.youtube.com/user/jyoutou

I am simply making the best of what I have. 9 and 10 inch wheels and in 14s,195/60 are the most common and cheap size. Cheap is good when at best they only last a day's play.

Edited by dodgybrooks
You boys are thinking backwards. You make the car fit the wheels. :P

Zokusha is kinda like the ute culture in Aus. Feral. :(

http://jp.youtube.com/user/jyoutou

I am simply making the best of what I have. 9 and 10 inch wheels and in 14s,195/60 are the most common and cheap size. Cheap is good when at best they only last a day's play.

I thought it was called yankee

I've heard of bosozoku, yankee and highway racer style applied to them, maybe zokusha is slang for bosozoku or something.

They're just a group of enthusiasts who style 1970's and 1980's cars kinda in the theme of the then race cars, and then some. They're pretty much the Torana and Gemini drivers of Japan. Anyways, they've been around a lot longer than the drifters... and the reason they stretch tyres is:

1. its a lot cheaper to stretch a narrow tyre onto a wider rim, than buying a wider tyre.

2. its part of the "look"... so even though they may own a $50,000 KPGC10, they'll still stretch the tyre because its part of the tradition now.

3. They don't give a rats ass about performance. Its the stigma they care about.

Now fast forward to Australian "drift look" cars. I use this term because half the muppets running around these days with BN Sports kits and vertex kits and "omg dishhhh" wheels with stretched tyres, would get their panties all up in a bunch when you ask them to drift their car for real. I mean... who'd want to gutter bash their $3000 Professor SP1's right? And no fishies down a wide road or getting your arse end out around a curb in your neighbourhood doesn't cut the mustard either.

So onto the real reason for stretching your tyres if you are a drifter:

1. 99% of real drifters aren't sponsored, are poor and can barely afford to keep their cars on the road. Wide tyres are out of the question. Find tyres that your local tyre shop or service centre is throwing away (out the back, ask for em) and make them fit the wheel.

2. You car is stupid low to the ground, your guards are flared and your wheels are just the right offset that they sit flush with your guards, or just slightly out. If you were to run the right sized tyre for your wheels then you'd scrape the f**k out of them with your guard when you corner or when there's weight in your car. So you stretch the tyre, and the angle of the sidewall corresponds or tucks nicely with the flaring of the guard.

If you find a so called drifter that's running wide wheels, with stretched tyres and you can fit more than one finger between the top of his tyre and his guard, then go over to him and punch him in the c**t and tell him to either fit better tyres or lower his car.

Seriously... I'm sick and tired of looking at 4WD height drift style cars and posers running around with "omg sickkk dishh" wheels and $4000 paintjobs on their vertex/uras copy kits claiming to be drift superstars.

here's a couple of examples of where a stretched tyre is practical:

From the US:

s14fs01.jpg

From Adelaide:

DSC_0017.jpg

Here's an example of a "drift style" car with a 4wd ride height

post-42625-11890648342141230243.jpg

remember kids, stretched tyre and gap between wheel and car or 4WD style ride height = punch in the c**t.

Do it properly or don't do it at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...