Jump to content
SAU Community

Recommended Posts

Hi All,

Time has come for me to get cams but i want direct drop in without having to change clearances and take head out get new springs so fourth, will do that in future once i get my hands on a short block to send away to get the works done!

Ok the only ones ive found are Tomei 256 Duration 8.5mm Lift For $800 Delivered Thanks Slide

Obviously ill be getting the cam gears to suit again ive only come up with Tomei $369 Again Thanks Slide

Wanna know what else is avaliable Trust/Greddy Hks ?? Watever Werever Dont want reground crap real deal only!

Cheers All

Peter

Link to comment
https://www.sau.com.au/forums/topic/193527-cams-direct-drop-in-for-r33-gtst/
Share on other sites

^^^^ Trust still havent released the RB25 easy cams yet, expect maybe autosalon launch. They are still finalising a few new updated profiles..... expect them to be cheap like the SR ones .

just something I've found with the RB25, alot of people snap the exhaust cam when putting in aftermarket cams, it usually isn't due to a bad installation but the fact that the head has warped on the exhaust side over time and putting in a cam that is true without getting the cam bearings line bored can cause problems with clearances. Just be mindful as snapping a $400 cam ain't much fun.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...