Jump to content
SAU Community

Recommended Posts

Hi all

I have a R34 GTT with the following suspension mods:

- tein super streets

- whiteline front (24mm) and rear sway (20mm) bar both on soft

- front and rear camber kits

- front castor kit

- aligned to SKs settings, pretty much everything is SK spec except coilovers and slightly smaller rear bar

Problem I am having is that when I take say a hard left corner, the rear seems to hop hop hop as if the rear passenger wheel is coming up and off and onto the road again. Its either that or the tyres are rolling on the side so much that Im getting that feeling. it is hard to explain but its like the rear of the car is hopping along to follow the cornering line.

The front seems fine to me and is well planted.

Any ideas what it could be? or what I should try to get rid of it? is it too much body roll?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/193750-rear-seems-to-hop-on-hard-cornering/
Share on other sites

does the car actually kind of buck? called pig rooting? happens in slower, tighter corners. and it happens when you are getting on the power just before the apex?

does the car actually kind of buck? called pig rooting? happens in slower, tighter corners. and it happens when you are getting on the power just before the apex?

Dont quite get what you mean by bucking BB? But im def. not getting on the power early

like as in the car is behaving as though it was a mechanical bull. ie jerking up and down as you are cornering?

I get that, but only on the street. I know my rear springs are too hard, but is there another reason it happens?

I seemed to have that problem at one stage :) my cars left hand rear shock had gone simple bounce test later and a replacement found and its been all good so far

it bounced around on tight corners but also on long sweeping corners at speed :) however it may have no relevance as i have a 33 but still thats my 2 cents hope it helps :)

Edited by SeanO
Were the Teins new?

You keep having weird problems with this car eh.

Are you slowing or accelerating through 80km/h during this corner?

Have you got a new bike yet?

Hahaha i dont really have any problems at all, i always think i do but its always fine in the end, i think its just my fussy self hahah

i think ive been pretty lucky to have everything go well with the car so far (knocks on wood)

teins are new, 1 year old, only done maybe 10 thousand km on them

its like a tight bend, im only doing maybe 50km/hr, maybe its just the nature of the bend, its one of those ones that get tighter as you get into it

naah still trying to sell the white cibby first, then onto a 600cc hopefully

i have exactly the same problem too. Theres a nasty winding road when i got to Bendigo its like a U turn on the middle of the hill and each time i turn it seems the tyres are slipping at the rears. Sort of felt like going into a dip and the car bounce back. I installed the tein read my signiture for specs.

Sounds like, insufficient rebound damping in the shocks to control the spring wind up caused by the rear squat on acceleration. Typical of a poorly matched spring rate and shock valving.

If you have adjustable shocks, try winding them up towards full stiffness. It sometimes helps.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...