Jump to content
SAU Community

Good Panel Repairer / Painted In Western Suburbs?


Recommended Posts

Hi fellas,

Need some help, do you know of any good panel repairs / painters in the western suburbs?

I don't want to drive all the way to say, Springvale, I'd rather have it done locally - I'm sure there must be some one around here that can help.

Name and contact would be super - planning to get it done soon.

Thanks.

Rugolo motor body works in ascot vale, they do porshe's ferrari, audi, honda, nissan ect pretty much every make but mostly high end stuff, talk to franco or danni they'll help ya out

Rugolo motor body works in ascot vale, they do porshe's ferrari, audi, honda, nissan ect pretty much every make but mostly high end stuff, talk to franco or danni they'll help ya out

Thanks buddy... but, are they reasonably priced?

Thanks mate.

GAL 18 garden drive tullamarine....no ferrari's,no shit and glitter...just an excellent bunch of people and a good job...but he is always busy

Thanks mate.

But do you have a contact number?

Anyone else mateS??

Um try around sunshine area there are few ok joints i cant remeber names atm but have a look in the yellow pages and Panel shop on Mctyre Rd i dont think my spelling is right....

but hope that helps

Custom Body repairs - McIntyre rd (across from western distributors) ask for Dave

Dinamo Motors - 30 Green st - Sunshine 9312 3720 Very good panel beater all round.

GAL - in tullamarine (if not bizzy) 9330 3137

Artistic - High st Epping (turn right before the light at epping shopping centre

High performance paint and panel - 4 Lemmon Ave Keilor East 9336 4542

Transcar - 9309 9930

Custom Body repairs - McIntyre rd (across from western distributors) ask for Dave

Dinamo Motors - 30 Green st - Sunshine 9312 3720 Very good panel beater all round.

GAL - in tullamarine (if not bizzy) 9330 3137

Artistic - High st Epping (turn right before the light at epping shopping centre

High performance paint and panel - 4 Lemmon Ave Keilor East 9336 4542

Transcar - 9309 9930

Thanks, Slyne - you've saved my liner... much appreciated, really it is much appreciated.

I'll get my car fixed very soon... thanks so much!!

Regards,

SM

Thanks everyone else for your ideas too... perhaps we can do a west-side cruise one day!

  • 2 weeks later...

Well, the time has come for me to get off my butt to fix my car's exterior damages... this weekend is it...

Any other good panel beaters in the Western suburbs???

dude, how many places do you need??!!? Would you like to send individual parts to different workshops or something!

GAL seems to be THE joint to go to out west

have you even rung any of those places? find it hard to believe non of them suited your needs... there's a lot of workshop names listed in this thread

dude, how many places do you need??!!? Would you like to send individual parts to different workshops or something!

GAL seems to be THE joint to go to out west

have you even rung any of those places? find it hard to believe non of them suited your needs... there's a lot of workshop names listed in this thread

Ha ha ha.. well, I wanted to get a good list and then decide which ones suit.. :D

I rang a few places - I think I got a good one - it's called Primal Panels... very competitive price. :D

Thanks all.

mate, speaking from experience, DON'T go with the cheapest price. There is a very DIRECT corelation between money spent and results achieved, when it comes to panels/painting.

Did you get a quote from GAL? Word of mouth counts for a lot, i don't think Primal panels has been mentioned in this thread...

what needs to be done on your car?

mate, speaking from experience, DON'T go with the cheapest price. There is a very DIRECT corelation between money spent and results achieved, when it comes to panels/painting.

Did you get a quote from GAL? Word of mouth counts for a lot, i don't think Primal panels has been mentioned in this thread...

what needs to be done on your car?

Hi mate, you might not remember me - I bought the R34 Nismo wing off you a couple of months ago - we met in Chadstone, remember? Yeah, mate - I know GAL is a good workshop - I have called him, will bring my car into his shop this weekend for a quick quote... but to be honest, price is a bit of an issue as I am on a bit of a budget.

My car needs 3 things done... the quater panel near the back close to the lights on the right side (close to fuel cap) is damaged and has a dint size of a palm... that obviously needs to be pumped out and repainted... my whole back boot needs to be repainted and a new GTR wing (currently only in primer) needs to be be painted and fitted.

Overall, Prime Garage have quoted me $500 for all of the above work - which is absolutely excellent... that's pretty much about all I can afford for the above now... if anyone can match or beat this price then I'm all ears.

What you guys think?

Thanks for your advice bro... hope you're doing well.

make the effort to get to DT panels in springy

they just finished our streeter and he is the only place in vic who touches our cars.

Is it the place with chubby dude called Vu Tran? ;)

He's got a bit of an attitude problem and also, DT are pretty expensive and takes ages.

Edited by Spunky Munky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...