Jump to content
SAU Community

18s Scraping On An R32

julion
 Share

Recommended Posts

julion Community Regular

julion

Posted
Posted

I just got some 18s with 245/40/R18 tyres

the inside of the front tyres scrape on a metal piece (looks like part of the suspension)

It only really does it on hard conering, but is very off putting and Ive put my stockies back on the front.

Spacers kind of worked, but i was thinking about getting some smaller tyres?

is there any easy way to remedy this situation?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/194083-18s-scraping-on-an-r32/
Share on other sites
BHDave Grand Master

BHDave

Posted
Posted
hitting stuff with a hammer sounds like a good plan to me :ermm:

does anybody know the bit the wheels are scraping on im talking about?

will it matter if i tap this with a hammer?

no, it's a f**king stupid idea.

I'm guessing it's the upright that attaches to the top of the hub and the upper control arm and the tyre is flexing on hard cornering. Which means your wheels must have a shocking offset in order to 1) fit 245's without scrubbing on the guard and 2) sit the tyre in close enough to the upright to give problems on turning.

If it's the bit i'm thinking of then i don't recommend it. Though to be honest i dont think you could do more than dent it as it's a pretty beefy unit.

roll guards, flatten seams, remove inner guards, go for it. don't go anywhere near the arms, hub or uprights with a hammer

adam-__- Grand Master

adam-__-

Posted
Posted

No way would I recommend knocking the hubs, swaybars or anything like that either, I was only talking about the guards.

I don't see how a wheel would rub against the hubs or uprights though. Only thing I would see it rubbing is the coilovers or brake calipers.

Taleb Tyres Proficient

Taleb Tyres

Posted
Posted
no, it's a f**king stupid idea.

Haha hey buddy i agree with you there, i dont mean going kamikaze with a hammer on the inside of the wheel area hoping for the best, Ive heard and dealt with enough of these problems to know that most of these issues are small easy fixes, most.

Depends where your problem spot is, get a pic if you can mate we can help you out more.

If your not sure where it is get a crayon or something similar and go over the inside edge of the tyre, or wherever you suspect its rubbing, drive around the block, have a look and see where its hitting..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...