Jump to content
SAU Community

Recommended Posts

lol what a waste of a thread... people will only pay what they are willing to pay. around the brisbane area there is way more 33's so around here the price on 32's is a little higher. theres ooodles of both getting sold though, so its up to the buyer to deicde on the "thats to dear" or "thats a bargin"

  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

to the fella who started the topic:

F**K YOU! :D

Here you go mate..

Oh... I see your pain...

http://www.skylinesaustralia.com/forums/br...32-t182856.html

hey.. not my fault you paid too much for a nugget.

but it's ok..

you can sleep well knowing that you got a car with a boat anchor for a motor

Make sure you keep those revs over 4K mate.. you don't want to find your self in the Subaru Twin turbo style Valley Of Death

The R32's seem to be holding their value the past few years - So hard to find a clean example now so i went along with the importing route and scored a clean example for 12k which i thought was a reasonable price.

Re-itterating on a lot of points here, the P-Plate restrictions, lack of clean examples, baseline value are playing a huge part in the prices and there's nothing you can do about it. If you really like the car, you would fork out the money for the price being offered.

Everyone has their own opinion, it's just that hardly anyone can present a mature point - sound like a bunch of school kids fighting over what match box car is better than the other. Get over it - reading this shit puts me off visiting SAU.

hmm well personally i wouldnt pay $600,000 for a 30+ year old ford... but people do!

it comes down to what people want, and supply and demand!

...if no one wanted them, people would be struggling to sell them, so people would be asking less for them! Simple

Edited by Ruffels
hmm well personally i wouldnt pay $600,000 for a 30+ year old ford... but people do!

it comes down to what people want, and supply and demand!

...if no one wanted them, people would be struggling to sell them, so people would be asking less for them! Simple

You're comparing an R32 GTST to a GTHO? :rofl:

Here's another way to look at it.

Cheapest R32 GTST I've probably seen was about $6K.

a shitty, faded, 89 model with oil leaks etc etc.. what youd expect for that money right.

cheapst R32 GTR I've seen was $13K.

same condition.

Both same year

$7K apart.

new car price for both?

$40K for GTST??

$100K for GTR?

It's only the R32 GTST owners that seem to be confused about the value of their cars (mexicans I can understand due to P Plate restrictions)

$12K for a clean undamaged, smoke free R32 GTST is a fair price in my eyes.

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

lol @ matchbox styles

Also lol @ rb20 = boat anchor, that means they should be in the 33 because they're a boat

:rofl::D

Actually i would probably get a S2 33 over a non-type M 32 (with the nice front bar)

Edited by GTAAAH
You're comparing an R32 GTST to a GTHO? :rofl:

Here's another way to look at it.

Cheapest R32 GTST I've probably seen was about $6K.

a shitty, faded, 89 model with oil leaks etc etc.. what youd expect for that money right.

cheapst R32 GTR I've seen was $13K.

same condition.

Both same year

$7K apart.

new car price for both?

$40K for GTST??

$100K for GTR?

It's only the R32 GTST owners that seem to be confused about the value of their cars (mexicans I can understand due to P Plate restrictions)

$12K for a clean undamaged, smoke free R32 GTST is a fair price in my eyes.

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

you got that wrong ey... its not the OWNERS that are confused about the value of their car... its got to be the BUYERS, if you own a car you know is worth (example) $20,000, and someone offers you $24000, would you say no?? its a buyers market, the buyers bring the prices up or down, not the damn sellers.

you know if a car is over priced, cause it will start at (example again) $17,000...then go to $15500... then maybe 15k and so on till it reaches its price range.

there are plenty of "suckers" as you call them out there wanting to buy a car, and hell if a "sucker" come up to me prepared to pay more then the value of my car, il say yes!!

CJ

I reckon, that in the long run, better looking cars hold their value better. Now an rb20 is pretty easily replaced with a 25, but try and make a pig ugly 33 look like a 32..... sorry guys, but everyone know 32s are a way better looking car than 33s.....

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

Doesn't the fact that we know there are suckers make us more opportunist than dreamer?

Despite being a little slow i feel the need to retort to some earlier posts

car018.jpg

fat_lady_eating_cake.jpg

and

Skyline_VTX_Bodykit.jpg

83mrtbuff.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...