Jump to content
SAU Community

Recommended Posts

Hey,

I've noticed lately that on my drivers side when driving i get this " creeking noise " ? i dont know if its my suspenion or yeah, ive heard that it could be the upper control arm bushes. Im not sure but id like to get rid of it quick.

Thanks heaps.

Edited by ezekiel10
Link to comment
https://www.sau.com.au/forums/topic/194825-skyline-r32-gtst-t-creeking/
Share on other sites

I also have this problem. Both sides from the struts, pretty much only when its cold. Im assuming may have something to do with strut brace? It may be too tight or too loose? Can someone verify please, it is quite annoying.

Could be a worn out shock. Worn out shocks usually make a 'rubbing' 'creaking' noise when going over speed humps.

Like what's said above, probably best to change the bushes while you're at it.

Yeah " NRV155" same with mine when its cold, but yeah ill get on to changing the bushes and hopefully thats it.

Thanks

Ill do the same. If you get it done first, post back and tell me if it fixed the problem. Ill do mine in a couple of weeks.

My r33 has been doing this alot lately, i can hear it the most when turrning the wheel at slow speeds(ie speed humps), and when pulling into a driveway at angle etc....it sounds like the squeel is coming from the rear, but i can hear the front as well.......sound travels though,.....what is this?and will it progressively get worst?

hrmm i got my bushes changed last week (camber,castor) and i have a creeking sound coming from front passenger suspension when i go over speed humps..Never had that problem before i changed the bushes? Any idea on what it could be?

Well, i took my car to the mechanic today to show him and of course the noise wasnt there, not even going over speed humps. He said when it starts again to go straight to him so he can have a look. Until then, ill never know.

Well, i took my car to the mechanic today to show him and of course the noise wasnt there, not even going over speed humps. He said when it starts again to go straight to him so he can have a look. Until then, ill never know.

haha don't you hate it when that happens? You go to show someone to show them what's wrong with the car and the problem never happens.

did camber/castor bushes front, rear camber kit, whiteline swaybars with the associated bushes, new bilsteins means that the eye in the bottom of the shock in the rear wont squeak, it was the bushes/bars that stopped my creaking.

-Ryan

Do urethane bushes squeak?

Basically NO. squeaking is caused by high frequency vibrations that can be heard rather than felt. Usually the cause of squeaking is the incorrect application of grease (not greasing the correct areas eg: flange faces & internal bores), greasing the incorrect areas (outside of bushes designed to be installed inside the suspension component) or even over greasing (applying grease everywhere), however the presence of rust, paint or rubber deposits between the bush and the component or housing can also be a major factor.

check your brake pads..

i had this same "creaking" noise on my R32 but could only hear it at low speeds

turns out it was the fact that my break pads were so lowthat the pistons in the caliper were creaking from having to move so far to engage the pad!

haha don't you hate it when that happens? You go to show someone to show them what's wrong with the car and the problem never happens.

Haha reminds me of my old VN SS. It was an auto and was stalling constantly. So much so, I wouldnt bother driving unless I really had to. Took it to a workshop, they had it all day running and constant driving. No stalling...

Got it back the next day. Stalled constantly and I then sold it to a mate and never had the problem EVER.

(And no, it didnt have a clutch! :thumbsup:)

Back on topic, my car does this too.. only out of my driveway in the morning.. I suppose everyone has to wake up :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...