Jump to content
SAU Community

How To Install Apexi Turbo Timer

H@ME

By H@ME,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

R TUNE Mentor

R TUNE

Posted
Posted (edited)

Ok just did this on my R32 GTS-T auto (4 door)

the wires listed above are correct except for the on wire (green to black with yellow stripe)

this is in fact the black wire with white strip in the r32 GTS-T

so wires as follows.

Red (acc)= white wire red stripe

Blue (constant) = blue wire

Green (on)= black wire white stripe.

Edited by redliningr31 skyline
  • 4 weeks later...
maddowse Proficient

maddowse

Posted
Posted
i have one of these installed in my car

the auto function doesnt work, but that doenst realy bother me

what bothers me is that i cant lock the car with my remote when its stil running else the alarm goes off.

anyone know how to fix this>?

remove your alarm !!! thats why the auto function does not work !!! i went to get one installed in my car but the guy said because of the way the alarm is wired in it will not work !, it will ether keep running and never turn off or not work at all .

hope this helps but id sugest looking for an alarm that may have one included (havent found one my self yet ) but i recon thats the only solution

gotRICE? Veteran

gotRICE?

Posted
Posted

Id agree with that. You dont really need one haha.

I only keep mine in cos it was there when i bought it. Its amazing how many bone stock turbo cars have them. I think the Japanese got more sucked into the turbo timer thing than everyone else!

But then, i do use mine at track days. Other than that it pretty much only ever counts down from 10, as i drive sedately until i park up, and by then it thinks it only needs 10 seconds.

Burrieddreamz Contributor

Burrieddreamz

Posted
Posted
Hello there ....i realise that this is an old threat,but i really need som help : S

i just installed a Apexi Full Auto Turbo Timer on my S13.all wires are correctly installed but i have a problem.when i turn the ignition switch off the timer starts

the countdown and when it reaches at 0 sec the timer starts all over again.so my engine wont turn off.i've tried everything i could think of.

if anyone knows the solution!!oooh also the A/F doesnt work.the red led just keeps flashing.the 02 cable is correcly installed in the ECU.

every thing is connected as it supposed to be. btw i swapped to a RB25 dont know if thath helps..

Thanks alot

I got the same problem mate!

I cant get thing to work.

I did as per the instruction and my engine doesn't turn off.

the count down goes to 0 and then engine starts again . I think its the relay thing thats creating a  problem..( I got 2 brand new Apexi turbo timers .. both does the same thing.)

any help with it?  :)

  • 3 months later...
ehutton98 34 Newbie

ehutton98 34

Posted
Posted
Ok just did this on my R32 GTS-T auto (4 door)

the wires listed above are correct except for the on wire (green to black with yellow stripe)

this is in fact the black wire with white strip in the r32 GTS-T

so wires as follows.

Red (acc)= white wire red stripe

Blue (constant) = blue wire

Green (on)= black wire white stripe.

hey just joined skylines au ive got an apexi auto timer nearly installed in my r34 its all in bar the green n blue wires just wondering if those wires would be the same on the r34 ignition coz i cant figure where those 2 ignition wires hafta go if anyone can help would be greatly appreciated
  • 3 weeks later...
  • 3 months later...
H@ME Mentor

H@ME

Posted
  • Author
Posted

Ok just did this on my R32 GTS-T auto (4 door)

the wires listed above are correct except for the on wire (green to black with yellow stripe)

this is in fact the black wire with white strip in the r32 GTS-T

so wires as follows.

Red (acc)= white wire red stripe

Blue (constant) = blue wire

Green (on)= black wire white stripe.

Good to see people still using my tute, thanks for the update for install on R32 mate!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...