Jump to content
SAU Community

Dumb Stuff You Just Shouldn't See On The Road!


Recommended Posts

  • Replies 250
  • Created
  • Last Reply

Top Posters In This Topic

smart things we should see on the road on this very special day: australian flags hanging out of windows or on airiels!

happy aust day

peace

Well speaking of that... I think there is still overboard.

I saw one that no word of a lie would have been 6m x 4m at least, was on a ute obviously. Rather funny.

All the above mentioned idiots and their cars really don't help the Red Neck cause!

yea.. Happy Australia day everybody..

take it easy.

I got invited over to the skid pan yesterday to see some of the local

sil's, 180's & 200's go at it..

I was totally shocked at one 200sx owner who blew up his SR20! ..and i do mean blew up. rod out of block kind of blown up!!

it started to make a big end noise.. rather loudly. The SR was not happy, so the smarty thought it needed a rev tune, that made the SR even more unhappy. he went back onto the pan and gave it what for. As he left the pan it gave up the courage to live and grenaded itself out of this world.

Damn, what is wrong with some people? R wrecking yards giving away SR's? I just cant understand y anybody would want to do that to their car? Instead of just having to dismantle the bottom end, now it looks like he needs a whole new engine.. Perhaps we should all pitch in and buy the lad a 4cyl VOLVO!

Well speaking of that... I think there is still overboard.

I saw one that no word of a lie would have been 6m x 4m at least, was on a ute obviously. Rather funny.

Saw something like that last night on the way to Willowbank, a ute with a flag tied from the top of the roof to the back of the tray, was freakin huge !

The young fella a couple of doors down has got an early 80's swift/barina with hole in bonnett and obligatory air filter poking out, also coming from the same house a bog stock vt ss sporting dash/console/pillar and bonnet gauge sets....wtf!! and almost weekly canarys.

Always makes me lol when I walk past.

I had one of those knight rider supras pull up next to me and try to race me. As he took off, I noticed that it was NA, with a massive exhaust, and custom SUPR4 plates. I think they were worth more than the car.

Did not even try to race him, just laughed at him at the next set of lights, as he sat there, once again reving the engine.

How the..? nice crunch!

dja notice the veiw in the mirror? who took the foto?

I saw a civic today with Vic plates that had twin exhausts.. but it gets worse.

he was shopping or something, cut INTO the bonnet were 3 gauges!

Kinda like a reversed upside-down chinese triangluar air scoop.

It looked stupid, i bet he couldn't read them either.

Is there cheap crack for sale somewhere or what?

How is it possable that so many idiots can do so much dumb stuff.. and still manage to breath?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...