Jump to content
SAU Community

Recommended Posts

Hey everyone,

Im possibly about to purchase a pair of Garrett 2860-5 turbos. Can anyone tell me the differences i will most notice with either 0.64 and 0.86 exhaust A/R's. At first i didnt realise but now i have been informed you can choose from the two A/R's on the exhaust housings. Keen to hear of what either will do to overall power capability and response. I have my guesses but it would be nice to hear from people who have actually tried and tested them. If anyone has any other turbo options with similar capabilities at a similar price i would also be interested in them too. I want to keep the twin setup with the stock manifolds.

Thanks in advance,

Deren :D

Link to comment
https://www.sau.com.au/forums/topic/196840-which-garrett-turbos-should-i-get/
Share on other sites

Ok. Thanks for that. I guess my stock capacity wouldnt help anymore either! Anyone else got an opinion?? Sounds as though the .64 is the way to go but maybe someone has a dyno graph for each?

Thanks

Edited by Godzilla32

.86 rear isnt that big..

i had a 1.15 rear when bought it on my t04 changed it to a .84 and now its fantastic spools up very similar to standard with none to minimal lag.

every turbo and rear is different in lagginess etc. Garrett website should have graph's

.86 rear isnt that big..

i had a 1.15 rear when bought it on my t04 changed it to a .84 and now its fantastic spools up very similar to standard with none to minimal lag.

every turbo and rear is different in lagginess etc. Garrett website should have graph's

.86 rear exhaust housing on a single turbo maybe BUT not 2 of them, its like using a 1.3L engine to spool up a GT2860 with a .86 housing

Deren,

Have you considered what the power and responses you want from your car afterward?

Maybe look at the gt-ss kit, almost the same price.

In saying that and tossing up which turbs to buy myself, I have a pair of new 2860-5's sitting here in my office waiting for christmas to fit...

i'm looking at getting the GT2860-5's myself.

who stocks them for $2500?

i was planning to get them thru super cheap auto, staff discount brings them down to around $1100 ea.

however the garrett website says that the 2860-5 comes with the 'compact 5 bolt' turbine outlet (which won't fit standard dumps) , but the 'turbine housing option' is needed to keep your dump pipes.

I'm not sure which SCA stocks

hope it helps

Standard capacity 2 x 2860-5, PFC, dumps, injectors, "Spec R" Cat 3inch zaust. 430RWHP @ 1.3 bar, lag...pfft,just be in the correct gear. Go for the .64. If your going down down the road of new turbos go the dumps to...Tomei if you can afford.

Ususal Suspect..theres a pair in the for sale section

In saying that and tossing up which turbs to buy myself, I have a pair of new 2860-5's sitting here in my office waiting for christmas to fit...

Hey heller44, would you mind checking the ID tag on your 2860 -5's. Apparently they are now badged as 2560 -5's but still have the 2860 -5 specs.

I did look at the HKS GT-SS turbos but after a comparison i found the garrett 2860-5 will flow more with nothing lost in response.

A garrett 2560 is a turbo designed for the SR20DET. I fitted one about 6 months ago.

I was planning to get a set of CES racing dump/front pipes, similar design to the trust ones. Its a combined dump/front pipe but its assembled in 3 pieces.

Im a bit concerned now that they wont bolt upto the standard dump pipe flange design?!? Can anyone confirm this? I have my doubts that it will be an issue.. Better to be safe than sorry though.

Who sells them for $1200 each? Keen to know..

Thanks guys for all your input :P

Deren

Edited by Godzilla32

Deren, I'm pretty sure that the 2860R-5 will bolt up, they were sold to me as a "direct replacement". If split dumps are your preference why not go with the Trust extension front pipes a few guys on here claim good results with them although I'm told there seems to be a bit of a trick fitting them. Ring up a reputable tuner and see what they have to say. GL

I Thought the 2560 was the old name and the 2860 was the new name???

hmm... very interesting.

id tag says,

KJ 0134J

GT2560R

707160-5

Strange that they are still using what I thought was the old gt number even though the part number is the same.

Checked with the dumps that I have here and they match up perfectly, a set of secondhand old-style mines dumps, that will go nicely with the secondhand apexi front pipes... gotta love parts that don't wear out.

edit: Whats a 2530 kit going for now delivered? ~$3500? I bought my pair for $2540 delivered, and then had a brain fart and bought the fitting kit from nengun.. waited over 2.5 months for delivery but I have it all for significantly cheaper than the 2530 kit.

Edited by heller44

707160-5 thats the ones...

from the cattle dog

Turbochargers > GT28 Family > GT2860R - 707160 - 5

Ball bearing

* Oil & Water-cooled bearing system

* T25 turbine inlet flange

* Turbine housing has a unique "compact"

5-bolt outlet that is not interchangeable

with traditional T25 5-bolt outlets

* Turbine housing is cast from high-nickel

"Ni-Resist" material for extreme

applications

* Turbine wheel is cast from "Inconel"

material for extreme applications

* Great size for applications w/ packaging

constraints

* Ideal for smaller displacement engines

making up to 320 hp

* Ideal for twin-turbo applications on medium

size engines making up to 600 hp

* Turbine housing option available

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...