Jump to content
SAU Community

Recommended Posts

Item: Garret T04Z 800HP Ball Bearing Turbocharger (Ex Housing : 0.70 A/R. T4 Split Pulse) 0.70A/R Comp Cover

Condition: BRAND NEW, never used

Price: $1900 or nearest offer. I paid $2300 for it originally with ported shroud option

To Fit: (What car) Any car

Location: Sydney

Contact: Reply here or VIA Private Message

Comments: Brand New with ported shroud comp cover (looks like bullet holes). No longer need it for my car. Perfect for high power GTR or GTS-T/GT-T

Edited by Blue_GTR
Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/
Share on other sites

Item: Garret T04Z 800HP Ball Bearing Turbocharger (Ex Housing : 0.70 A/R. T4 Split Pulse) 0.70A/R Comp Cover

Condition: BRAND NEW, never used

Price: $1900 or nearest offer. I paid $2300 for it originally with ported shroud option

To Fit: (What car) Any car

Location: Sydney

Contact: Reply here or VIA Private Message

Comments: Brand New with ported shroud comp cover (looks like bullet holes). No longer need it for my car. Perfect for high power GTR or GTS-T/GT-T

hi mate is this a full kit, can u put some pic up.

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3536394
Share on other sites

hey mate i been told to get a gt35r, how would this turbo compare to that? i might be very interested, when dose this spool and hit full boost? how much power do they usualy make on a 34gtt at the wheels ? will i need internals ?

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539107
Share on other sites

hey mate i been told to get a gt35r, how would this turbo compare to that? i might be very interested, when dose this spool and hit full boost? how much power do they usualy make on a 34gtt at the wheels ? will i need internals ?

This turbo is pretty much one size larger/step up from the GT35 in the Garrett Catalogue.. On an R34 GTT, you would definitely want internals and cams done to get the most out of it. These turbos need to run 18-20psi+ boost to get in their efficiency zone where they really start making good power. You would probably hit full boost by 4,500-4,900 RPM. And then hit redline very very quickly

In my opinion it would make over 350kw atw very easily with supporting mods. I know of GTR's making 400awkw with this turbo. If your sticking with standard internals, i wouldnt go larger than a Garrett GT3037/GT3076. They will easily make 250-290kw atw with standard engine GTT, depending on supporting mods.

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539152
Share on other sites

ive got a r32 gtr with standard internals, ive got like the turbo back exhaust, the apexi pwc, adjustable greddy cams and a really good boost controller, also got a trust fmic 300+600+100mm with the hks pods, i always wantesd to ask someone, will i be able to run a t04z turbo kit with a standard bottom end and what psi will ui be able to run it at because some people say you can never run a t04z turbo on a standard gtr bottom end, but please let me know,

cheers tony

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539258
Share on other sites

i got prity much same setup on my r34 gtt with a few more things but not cams. and iv been told that i can get the gt35r with a good tune and expect 360hpatw which is what i shouldnt try to go over with standard internals n bottom end..

but im wondering if this will be an option to dump this big boy on insted for almost the same price.. :)

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539402
Share on other sites

ive got a r32 gtr with standard internals, ive got like the turbo back exhaust, the apexi pwc, adjustable greddy cams and a really good boost controller, also got a trust fmic 300+600+100mm with the hks pods, i always wantesd to ask someone, will i be able to run a t04z turbo kit with a standard bottom end and what psi will ui be able to run it at because some people say you can never run a t04z turbo on a standard gtr bottom end, but please let me know,

cheers tony

Tony,

With the supporting mods you have it would be fine, do you have greddy cams and adjustable gears or just adjustable gears? I would suggest cams or at least your standard cams dialled in to get most of the larger turbo. I know of R32 GTR's running between 300-350kw at the rears with T04z, 260's cams and standard bottom end. Also running 11sec1/4s on Pumpfuel. Expect full boost around 4,500-5k and it will take off like a jet from there. I probably wouldnt run more than 19-20psi on the standard bottom end, and with a good tune.

Keep in mind to change to single turbo you will also need the following:

*Turbo Manifold to suit single T04Z turbo (6Boost are around $1,000, HKS are $1500+ or Ebay for under $450)

*External Wastegate -44mm or larger, id personally go a 60mmV-Band (HKS $1000, or Ebay $250ish)

*New dump/front pipe and screamer/wastegate pipe (Would have to be custom)

*Bigger injectors, Walbro 255LPH intank Fuel Pump

*New intake pipe and airfilter setup to suit single turbo

*New/modified intercooler piping from turbo to intercooler

*Larger AFM's if not running MAP sensor type ECU

And last of all, dyno tuning. Would still be cheaper than buying a full HKS kit etc, if you buy the right parts to match it.

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539652
Share on other sites

Tony,

With the supporting mods you have it would be fine, do you have greddy cams and adjustable gears or just adjustable gears? I would suggest cams or at least your standard cams dialled in to get most of the larger turbo. I know of R32 GTR's running between 300-350kw at the rears with T04z, 260's cams and standard bottom end. Also running 11sec1/4s on Pumpfuel. Expect full boost around 4,500-5k and it will take off like a jet from there. I probably wouldnt run more than 19-20psi on the standard bottom end, and with a good tune.

Keep in mind to change to single turbo you will also need the following:

*Turbo Manifold to suit single T04Z turbo (6Boost are around $1,000, HKS are $1500+ or Ebay for under $450)

*External Wastegate -44mm or larger, id personally go a 60mmV-Band (HKS $1000, or Ebay $250ish)

*New dump/front pipe and screamer/wastegate pipe (Would have to be custom)

*Bigger injectors, Walbro 255LPH intank Fuel Pump

*New intake pipe and airfilter setup to suit single turbo

*New/modified intercooler piping from turbo to intercooler

*Larger AFM's if not running MAP sensor type ECU

And last of all, dyno tuning. Would still be cheaper than buying a full HKS kit etc, if you buy the right parts to match it.

bro i swear 2 god because you told me that i copy and pasted all the information u wrote to me and im going to go single to4z asap bro, thanks for that mait, ur a bloody legend, cheers mate

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539708
Share on other sites

bro i swear 2 god because you told me that i copy and pasted all the information u wrote to me and im going to go single to4z asap bro, thanks for that mait, ur a bloody legend, cheers mate

Haha.. No worries. Turbo is still for sale :)

Link to comment
https://www.sau.com.au/forums/topic/197803-garrett-t04z/#findComment-3539733
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...