Jump to content
SAU Community

Recommended Posts

Alright lads, just hear me out ok?

I'm from Perth. I was born there. But, I've been (and will continue to) living in Japan for the last 3 1/2 years. My wife is Japanese, and outside my apartment I see Skyline, after Supra, after Integra, after RX-8, after R35 2-door ALL with GT-wings, stickers, loud "can" exhausts, and flashing blue and red lights inside.

Now, how does that compare with "Rice"?

No kidding, before I came to Japan, I'm sure that phrase hadn't even been invented. The first I'd heard of it was in this forum!

So, does that mean everybody back home hates modifying the exterior of their cars now? Like in order not to look like "Rice"?

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/
Share on other sites

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

i remember 3 years ago this 'rice' phrase originated in the US.....mainly used to describe honda owners who hot up their rides...sometimes to a ridiculous extent(ie.something that has no performance value, yet looks like it):D

today however it's so blurred as to what is really rice or not.

these days you can't post a BOV question without someone telling you you "it's for ricers only"

can't post a GT-wing question without people telling you "it looks gay"

can't post a FMIC question without people telling you "you don't need it"

And post something regarding neon lights? You'll be like walking in a forest fire drenced in kerosene:rolleyes:

i personally don't have facist attitude against 'rice'.it's all subjective from person to person.

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-416144
Share on other sites

That race car is Attkd's R34... oddly not as fast as their R32.

Back on topic though, does this mean that what goes on in Japan (styling wise) is not considered cool by the majority of people anymore?

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-416314
Share on other sites

Honestly, who gives a s*#@ what other people think - if your car is riced up or not, it's your car and do whatever u want with it - i personally don't care what other people think. The only time i've found when people have a go at you is when they don't own one of our magnificant skylines, but drive some s*^#box car that's worth like $1000 bucks and is barely roadworthy - it just comes down to jealously at the end of the day - they want what they don't have, and cause they can't have it they bag the person who owns it labelling it "rice" - i'm putting neons on the car both inside and out - i'll most likely put some stickers (small ones) on the car, i've already all painted my interior bits, and i have a duel A-pillar guage but do i care what other people think... NO!! this is how i wanted MY car to be, so i did it!!!

just my 2 cents :D

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417114
Share on other sites

Thenks for the input guy's, I'm glad that people still stand up for what they want... for a moment there I thought it was the end of Japanese style.

Anyways, all this interest from me is because I'm setting up a "side" operation, to bring into Perth (only!) all the DIFFICULT, REALLY INTERESTING, hard to get parts, all genuine, ALL NEW and I'll be buying them at cost, so that will probs mean a cheaper price for you Japanese car freaks in Perth!

Still in the early stages at th' mo though...

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417128
Share on other sites

Hey Rezz,

That sounds excellent - can't wait to find out more, good luck with it, send me some info when it's up and going and i'll definately support u, (if u are willing to send interstate that is) :D

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417131
Share on other sites

My wife actually wants to immigrate to Melbourne! Shes heard nothing but good about that place (Perth and Melbourne). So it'd definatley be an interstate affair... lets beat those New Zealanders in the Jap import scene!!!

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417134
Share on other sites

Originally posted by Rezz

Anyways, all this interest from me is because I'm setting up a "side" operation, to bring into Perth (only!) all the DIFFICULT, REALLY INTERESTING, hard to get parts, all genuine, ALL NEW and I'll be buying them at cost, so that will probs mean a cheaper price for you Japanese car freaks in Perth!

Still in the early stages at th' mo though...

Hi Rezz,

Rest assured that you will have a strong market here in perth! Good luck with the venture... please keep us updated with this!!!

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417135
Share on other sites

Alright lads, tell me a price in Perth for a paticular part/item, and I'll do my utmost to beat it... where possible/ it's not friggin stupid to do so. (edit - :D )

You heard it here first... coz Skylines are my one and only (well, along with the wife!!!) love since Bathurst '91, and more than anything I want to promote Australian/Japanese motorsport culture, information, and Knowhow.

I know about the competition present in Perth, thanks Rob77 for bringing that up, but just remember guy's I'm not just in this for the financial benefit, but more to make my wife realize how much a good place Australia is, through the support of the Perth and Interstate Japanese import massive.

I've got some VERY good contacts in Japan and in Oz, so this is gearing up to be something special, if you guy's can support!

Link to comment
https://www.sau.com.au/forums/topic/19788-rice/#findComment-417424
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...