Jump to content
SAU Community

Recommended Posts

Hi, at Unique Autosports day i was told to cut the wire that does the auto lock of the doors as people who are stealing the car flick the lock switch and unlock the door.

anyway my friend has taken the door switch part off my door however we cant work out which wire to cut :) and i dont want to cut the wrong one :D

what colour is the wire that i cut?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/19798-door-unlock-button-urgent-help-plz/
Share on other sites

G'day dude,

Yepp, it's strongly advised to do this.

I did mine and from memory it's a brown wire that you cut. Or a wire with a brown stripe on it.

Cut it so you have enough left so you can join it back up. So if you do cut the wrong one you can still join it up again.

When you've cut the right wire, the button will still lock the doors, but won't unlock the doors.

Cheers

Jayson

Originally posted by Jay95R33

When you've cut the right wire, the button will still lock the doors, but won't unlock the doors.

Cheers

Jayson

wait....i'm confused:confused:....so how'd you get out of the car? :confused:

:confused:you mean the switches on the inside?:confused: how'd those thieves flick it from the outside? :confused:

Aero - there is a switch on the drivers door that you press and it will lock/unlock the passengers side door.

I'm not talking about the the drivers door lock, I'm talking about the other one that is there.

If you cut the wire to the button, you can still just unlock the doors manually etc.

Cutting the wire does not affect the central locking in anyway.

J

you can put an unbent coat hanger through the gap where the glass touches the roof and flick the switch, then u can get in the door without breaking the glass, and maybe w/o setting off the alarm. but hopefully it should go off as soon as someone inside the car moves.

Is that switch on the right hand side meant to lock both doors?? Or just the passenger one, because my switch only locks the passenger door.

That feature in my car comes in handy simply because I drive the car a lot by myself. Whats the benefits in disconnecting the lock. I thought it was quite a good function.

And how can people trying to hyjack the car, unlock the door? I'm a bit confused here!

NismoGirl - with the wire cut you can still lock the door, but not unlock the door.

You can still unlock the pass' door by unlocking the drivers door and the central locking will then unlock the pass' door.

I personally would my car as hard as possible to get into, so I have cut the wire. Sure my alarm will go off as soon as they open the door, but I'd like to make it as hard as possible to get the door open in the first place !

For an explaination of what can be done have a look at a5h's post above.

Cheers

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...