Jump to content
SAU Community

Recommended Posts

im not saying im super supreme (pun?) in anyway but i used to smash alot of stock r32 GTRs on a rollby but would get wasted off the line. but i would start catching up easily, but not enough to call it a victory. normally when i see a GTR i dont bother running off the line. maybe after i beat them real bad on the roll.

this was wen my car was at 250rwkw. so i cant wait to get my gt35 3.0L on the road =]

P.S i would like to explain again i dont think myself as uBur l33t. but just to give u an idea. wat do 32 gtrs output stock?

Edited by R34NRG
im not saying im super supreme (pun?) in anyway but i used to smash alot of stock r32 GTRs on a rollby but would get wasted off the line. but i would start catching up easily, but not enough to call it a victory. normally when i see a GTR i dont bother running off the line. maybe after i beat them real bad on the roll.

this was wen my car was at 250rwkw. so i cant wait to get my gt35 3.0L on the road =]

P.S i would like to explain again i dont think myself as uBur l33t. but just to give u an idea. wat do 32 gtrs output stock?

which drag strip in Melbourne does roll on starts?

which drag strip in Melbourne does roll on starts?

I have certainly never heard of one, which begs the question, how and where is the 'slowest skyline driver' on the road smashing all these R32 GTR's on 'roll by'?

Ive got to be one of the slowest skyline drivers there are. i never ever speed and havnt even done my 1st burnout hahahah (tyres expensive :) )

2nd gear pulls alot harder in rwd mode than awd in my r32 gtr. Feels like an extra 2psi. Cheers!

oh yeah its only noticable in 1st and 2nd gear.. when boosting in 3rd gear it obviously doesn't put much to the front wheels while in awd.. there for making very very little diff.

Edited by gtrboosting

Mine was tested at AutoSalon in 2005.

604awkw on the Sat and 608rwkw on the Sun. Same dyno, just dropped the front shaft and that was it.

not quite, but that difference isnt anything to get major excited about.

It will be less, but not substantially at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
×
×
  • Create New...