Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm new to the forums and all this nissan thing! I'm looking into buying a R33 Series 2 very soon as i've just sold my car!

Now as i said above, i don't know what to look for when buying a skyline, good service history, mild mods ? If someone can break them down in a list that would be very helpful!

Oh and I'm in SA!

cheers

vlad

Link to comment
https://www.sau.com.au/forums/topic/198101-buying-a-r33-gt-t-s2/
Share on other sites

Hi Vlad, Personally i would be buying one with some tasteful mods, such as Exhaust, Front Mount Cooler, Power Fc. Now they are the basic mods you NEED to be able to get decent power, but then comes turbo, fuel pump, air flow metre which are more of a personal choice, where as the exhaust and so on are a must and generally cost a bit more(apart from a new turbo), When it comes to bodykit and wheels.......... they are a personal choice and no doubt you will change them up when you want your own look. Hope that helps

Darren

P.S mines for sale for the right price...... >_<

Hi Vlad, Personally i would be buying one with some tasteful mods, such as Exhaust, Front Mount Cooler, Power Fc. Now they are the basic mods you NEED to be able to get decent power, but then comes turbo, fuel pump, air flow metre which are more of a personal choice, where as the exhaust and so on are a must and generally cost a bit more(apart from a new turbo), When it comes to bodykit and wheels.......... they are a personal choice and no doubt you will change them up when you want your own look. Hope that helps

Darren

P.S mines for sale for the right price...... >_<

Hi Darren,

Thanks for the reply! Honestly i don't want a car with excessive mods, as i am sure i wont use the full potential of that car! So as you have said I'd be looking into a car with really simple mods, exhaust, front mount etc. Your car does look nice but from the pictures I'm sure it will be out of my price range :)

Vlad

believe me mate once you put your pedal to the metal and feel that rush....you will be making use of all the power you got....as my advice get something stockish if you can and also make sure its manual...autos in skylines just suck man

I think he's talking about a 2 way, then it's most prob been drifted/thrashed

nah, an a-lsd acts like a very lazy viscous, locks when it wants, single spins around corners etc....

there in the v spec gtr's and late late model r33 gtst, im gettin rid of mine....

when u buy ur s2 look above the rev taco, if it has slip light and a-lsd the car has it

cheers, oh...and ur car wnt stay stock lol u will mod it when u feel the potential

believe me mate once you put your pedal to the metal and feel that rush....you will be making use of all the power you got....as my advice get something stockish if you can and also make sure its manual...autos in skylines just suck man

what ever have you driven a auto skyline with a stage 2 shift kit etc pfffft :rofl:

^ but, but, the interwebz sez i'll be faster in a manual! LOL

Personal opinion, and purpose must be considered. For circuit work and hills, I still believe manual would be better. If cruising and drags is your thing, then shift kitted auto hands down.

^^ sorry I have to disagree with you Lee, and totally agree with Allan.

I haven't yet done the kevlar plates/belts, upgraded stall converter and valve body to my R34 yet, but even with the standard auto trans I would kick the living snot out of a same power R34 anywhere - including the hills. With my steering wheel controls in semi-manual mode, I can change gears and apply power significantly earlier than a manual could - hence take higher speed into the corner (change down to slow myself down with my foot still on the throttle), then change up past the apex with my foot planted to the floor. I would be gone and have 2 gear changes done in the time a manual could match revs, clutch safely and apply power safely without spinning the wheels.

And once I get my trans upgrade done I am assured it will be 100% better, faster and stronger. I can't wait - and it will cost a lot less than my twin plate Exedy cost me in the S15 :rofl:

Yep love the clutch kicks man....and as per above comment i think i was applying what i knew from personal experience....and i disagree with hills driving even if yours is semi auto....maunals will any day give the driver a lot more better control then auto shiftkits or tiptronic...

yeah true, it all comes down to personal preference. I was just disagreeing with

but, the interwebz sez i'll be faster in a manual! LOL
- and yes, I realise it says lol :D

But I say don't make statements unless you have been through the hills in a tiptronic - it just makes you come off as ignorant. :O - like I said, (once I get my shift kit & trans upgrade) I guarantee you I will kick any manuals ass with the same power through the hills :rofl:

^Ahh, I see why you said what you did andrew, but I was actually trying to take the piss that so many young people "read something on the internet it must be true!"

I actually think that tiptronic auto's are the way to go, and would love to have a Golf GTi with the DSG gearbox, or even (just) the tiptronic Liberty GT would be nice!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...