Jump to content
SAU Community

Recommended Posts

Yes, I am an idiot .. no spare key :rofl:

Can't find my key anywhere in the house (where it must be since my car is in the garage). What is the the deal if I cannot find the key at all ? Luckily the car is unlocked at least. Will I be able to get a replacement key from Nissan or have to get a whole new ignition barrel and key from a wrecker or something ? I really do not want to have to change all the door locks as well.

Stupid, stupid, stupid for not having a spare.

Any suggestions ?? Is there a serial number on the ingnition barrel or something that might help ??

Stu

Link to comment
https://www.sau.com.au/forums/topic/198266-help-lost-key-and-no-spare/
Share on other sites

I believe you can take your vin no and other vehicle details (like chassis no) to any nissan dealer and they can cut you a new key using the factory specs.

I haven't done so myself but worth a call to a nissan dealer.

pull your door barrel out and go to a locksmith and they cut the key to the coding of the barrel we do it at work all the time for customers .

Thanks everyone,

I thought the key might have a transponder in it that would prevent a standard key from starting the car ?? Does anyone know if a standard key cut from the factory one will still start the car ?? (i.e. with no lock/unlock buttons)

Otherwise I guess I will be the guinea pig and get a key cut to the door lock barrel and see if it will work :rofl:

I believe you can take your vin no and other vehicle details (like chassis no) to any nissan dealer and they can cut you a new key using the factory specs.

I haven't done so myself but worth a call to a nissan dealer.

That wont work. Ever notice how a key wears down after use and eventually becomes just a flat edge with no bumps? Well, as the key wears so do the pins in the lock, meaning a brand new specifications key with highly accentuated edges will no work any more as the pins have also worn down to accept the worn key.

I would suggest you remove one of your door handles or the lock from the boot and go to a locksmith and get a new key cut that way.

That wont work. Ever notice how a key wears down after use and eventually becomes just a flat edge with no bumps? Well, as the key wears so do the pins in the lock, meaning a brand new specifications key with highly accentuated edges will no work any more as the pins have also worn down to accept the worn key.

I would suggest you remove one of your door handles or the lock from the boot and go to a locksmith and get a new key cut that way.

sounds like taking a barrel out is the go .. there goes remote clocking *sob*

thanks dudes.

my s1 had a factory allarm fitted but i had to get an australian approved one fitted. you may have a factory fitted allarm. i had a nissan sticker on the boot window but any alarm can be fitted to overide factory and work as the primary allarm, and central locking. hope u find your key. ps if u find it a copy cost 10 bucks

Theres a 4 digit number on every key. (it may be on the barrel as well), could also be on FAST?

Just quote the number to a reputable locksmith and he will cut it using the Nissan database.

no actual key required. (yes this means there are only 10,000 key combinations)

Some compliance shops feel it's prudent to grind the number off the key.

Our number is ground off our key, but it's in really good conditon so I'm just going to get some spares cut off the one we have.

Also, there should be a 4 digit number printed or stamped on the lock barrels. Just get that and get a key cut from the code, instead of taking out the whole lock!

Cheers, Greg.

  • 4 months later...

The one on eBay Australia? That one doesn't have the central locking remote control on it, it's just a key with a Nissan plastic cover.

http://cgi.ebay.com.au/GEN-NISSAN-KEY-BLAN...1QQcmdZViewItem

dont take out the barrel, take out one of the locks from the doors or the boot lock man.

BTW for anyone whos interested, you can get a mobile locksmith to come out and cut the key without removing any locks from the car. Takes them about 1/2 hour

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...