Jump to content
SAU Community

Recommended Posts

Finally I got over it, this car been build by one of our member up here Jason "V8SkylineMan". It is one of those early GTR 32. But everything is in good condition. The car done around 80000km. Looking for around $22000 with every single aftermarket piece on the car.

Spec:

1990 GTR 32 in black

Mods Include

Engine/Performance

Tomei Arms Turbo x 2 with custom polished Greddy piping

Tomei 268 cams

Custom blue cam covers

Custom blue intake plenum

Custom blue cambelt cover

Trust belt

HKS oil cooler and relocation kit with braided lines

Apex'i Hybird intercooler

Z32 80mm AFM's

N1 water pump

N1 oil pump

HKS pod filters

Apexi Power FC with Hand control (the GameBoy)

Greddy turbo timer

Greddy Iridium plugs-cold #7

Split fire coil packs

HKS 600cc Injectors

Nismo fuel pump

CES race dump pipes

CES full 3.5 in open race exhaust

OS Giken triple plate clutch

OS Giken Cross Mission Gears

Nismo diffs 2 way

Brakes/Suspension/Wheels

Racing Ohlins coil overs with helper springs

Adj suspension linkages Aftermarket suspension arms

Cusco tension rods

Brembo R33 GTR brake upgrade front and rear-ABS removed

Cusco brake boost stop kit

Nismo front and rear strut braces

Hicas removed

Nismo 18" LM GT-4 Wheels (Very Rare)

Interior/Exterior

N1 Headlight

Do Luck carbon bonnet

Carbon grill insert

Bonnet pins

Real Tomei Rear wing

HID

Short shift kit-razo knob

Tomei 310km/h speedo (Around 80000klms)

Blitz Mirror Gauges x 4 (Turbo,oil/water temp and oil Pre)

Greddy E-01 Boost Controller

Tinted Windows

Some other parts I may forgot... and some more information, the car would like a retune on the Power FC since the car not been driven for some time already coz of no license

post-14837-1198388314_thumb.jpg

post-14837-1198388485_thumb.jpg

post-14837-1198388678_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/198807-fs-skyline-r32-gt-r/
Share on other sites

  • 1 month later...


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...