Jump to content
SAU Community

Recommended Posts

Hi,

I was wondering if anyone knew of any other suspension products on the market (besides Tein EDFC) that allows for damper adjustable settings in the car? This is for an R33 GTR. I have searched around a bit but seems most of the in car adjustable gear is made for newer model cars and mostly overseas models. If they are not available from the major manufacturers, does anyone know if there are places that do custom suspension with custom in-car controls?

Thanks

Greddy are having a promotion with AUTOBARN this month where you get free in cabin damper adjustment with all TYPE-s coilovers.... i think the container i ordered was landing on the 1st of jan... give any store a call. i can no longer help though as i resigned a fortnight ago :D

Hi,

I was wondering if anyone knew of any other suspension products on the market (besides Tein EDFC) that allows for damper adjustable settings in the car? This is for an R33 GTR. I have searched around a bit but seems most of the in car adjustable gear is made for newer model cars and mostly overseas models. If they are not available from the major manufacturers, does anyone know if there are places that do custom suspension with custom in-car controls?

Thanks

Hi Mark, before you go ahead and waste your money, do you know what adjusting the damper rates actually does? Do you know what you are actually adjusting? Bump, rebound, both? If both, then in what ratio? Which way do you adjust them to overcome some low speed understeer? What about high speed oversteer? Do you really think that changing the rebound damping, on end or both ends, will affect the overall handling balance? Perhaps you think that soft for street is the go and then hard for track? What if that isn't right?

If you don't know exactly what you are doing, wouldn't you be better off with a shock that has a large window of operating efficiency so that you don't have to adjust them?

Happy New Year

Gary

Hi Mark, before you go ahead and waste your money, do you know what adjusting the damper rates actually does? Do you know what you are actually adjusting? Bump, rebound, both? If both, then in what ratio? Which way do you adjust them to overcome some low speed understeer? What about high speed oversteer? Do you really think that changing the rebound damping, on end or both ends, will affect the overall handling balance? Perhaps you think that soft for street is the go and then hard for track? What if that isn't right?

If you don't know exactly what you are doing, wouldn't you be better off with a shock that has a large window of operating efficiency so that you don't have to adjust them?

Happy New Year

Gary

Thanks Gary, thats good food for thought..

I used to have HKS Hiper-D coilovers, they shook the car too much and used to bounce around too much even on the softest setting. Now have Bilsteins with King Yellow springs (rate unknown). The Bilsteins seem firmer yet more comfortable and handle better but still get a lot of bounce going on so sometimes I wish I could just make it a bit softer at times to handle the crumby streets. I suspect the springs are too stiff so investigating that first but just thought as a possible alternative going with a decent coilover with an in-control unit that can make it easy to experiment with.

All in all, just checking all options and doing some research first before taking it to a suspension place as I am certainly no expert in the field :thumbsup:

My mate has Trust/Greddy Shocks and his car is the worst riding car I have ever been in, it jumps all over the road at highway speeds, and at low speeds it shakes your teeth out.

They were put on by the pevious owner in Melb (so not old slogged out Jap 15 yo ones). After experensing them I would never even think about trust/greddy suspention.

Oh Darn. I just ordered the Type-S from UAS - so no free in car adjustment for me.

Also check the spring rates. Mine are for a R33 GTR. They come in two spring rate options. I went for the 8F 6R option but you can get a 12F 10R. Sounds like the previous post had the latter.

Thanks Gary, thats good food for thought..

I used to have HKS Hiper-D coilovers, they shook the car too much and used to bounce around too much even on the softest setting. Now have Bilsteins with King Yellow springs (rate unknown). The Bilsteins seem firmer yet more comfortable and handle better but still get a lot of bounce going on so sometimes I wish I could just make it a bit softer at times to handle the crumby streets. I suspect the springs are too stiff so investigating that first but just thought as a possible alternative going with a decent coilover with an in-control unit that can make it easy to experiment with.

All in all, just checking all options and doing some research first before taking it to a suspension place as I am certainly no expert in the field :banana:

In the case of most Jap shocks you are only adjusting the rebound damping, hence it will make absolutely zero difference to how harsh it is on impact. All you are adjusting is how fast (not how far) it will recoil after the impact. Some adjusters (very rare) do both rebound and bump, but in a fixed ratio, generally between 10 (rebound) to 1 (bump) and 5 to 1. So they also make very little difference to the impact harshness.

By far the spring rate has the most effect on harshness and keep in mind that the standard springs are around 3 kg/mm. R32/33/34 Skylines are sports cars, so they don't have "soft" spring rates to start off with. What effect do you realistically expect when you are more than trippling the spring rate? A 10 kg/mm spring rate is still going to be a 10 kg/mm spring rate no matter what you do with a shock adjustment. Reducing it by 20% (to 8kg/mm) is hardly going to make a discernable difference.

What's the best spring rate? If you aren't going to lower the car and only use it on the road, then the standard spring rate is pretty much spot on. If you are going to lower it, then the ratio of 20% lower to 20% increase in spring rate is logical. If you are going to use it on the track then ask the tyre manufacturer what effective spring rate they suggest for your selected tyre. You will be hard pressed to find any "R" type tyre that will tolerate an effective rate much over 5kg/mm. As for a road tyre, then 4kg/mm is the maximum I have seen for a tyre that will fit a Skyline.

Happy New Year

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
    • Any idea where I can get genuine MAF apart from used ones? I can't find any only for GTRs and unfortunately that price is not in my budget 🤣 I might gap my plugs down and put my splitfires in, they were only in for a year or so before I started the rebuild 
×
×
  • Create New...