Jump to content
SAU Community

Recommended Posts

I finally got around to selling my r34gtt

Now the proud owner of my 2006 mazda rx8 6 speed manual. Colour is winning blue.

1.3 L Renesis multiside port engine

100% stock

Bought it off Australian motors as used demo.

Good price too :banana:

I've always owned and driven skylines

Even though it may not be a skyline, its still a nice jap car :down:

Im thinking of changing the wheels to either gold rims or black rims with chrome lip.

What do you guys think is better?

post-14703-1198855418_thumb.jpg

Edited by danieltangtc
Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/
Share on other sites

The stock wheels are 18x8 5x114.3 stud pattern, but with an unfortunate +50 offset most wheels you see on skylines won't fit. Best bet is to speak to a tyre shop such as Adelaide Tyrepower on Curry St or Wheelworx. They will tell you what is available and will fit :banana:

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3554898
Share on other sites

The stock wheels are 18x8 5x114.3 stud pattern, but with an unfortunate +50 offset most wheels you see on skylines won't fit. Best bet is to speak to a tyre shop such as Adelaide Tyrepower on Curry St or Wheelworx. They will tell you what is available and will fit :down:

def a +1 for goin into adelaide tyrepower. Troy's not back until next week (i think), but Brenton (32_4door) from here works there, hav a word with him. Nothing is impossible :banana:

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3554939
Share on other sites

Nice purchase! Pity they are so damn slow - but full of fun gadgets and nice looking interior at least :) I looked at buying one of these new, but couldn't bear dropping $30k+ on the changeover from my old S15

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3554950
Share on other sites

Nice purchase! Love the RX8 - some nice shadow chrome wheels would go nicely on it. How is it compared to the R34 GTT?

Hi bro,

the rx8 is slow ass compared to the r34. r34 has the bullet slingshot effect when the turbo kicks in. rx8 acceleration is very linear. Makes me surprise that wheel magazine managed a 0-100 time of 6.5 or somrthing in a stock rx8. Also rx8 can rev up to 9Krpm quite comfortably. The power of the rx8 is in the 8K rpm and beyond range. At low revs, a corolla would own it!

Handling wise, rx8 feels more balanced and the car makes taking corners at high speed vv easy (you think you are going much slower)

Apparently, you can turbo an rx8, and even make it a tri-rotary. theres been a small handful of ppl in Au and quite a lot of ppl in US that have done that.

CHECK OUT THIS VIDEO. THis is a turbocharged 3 rotary rx8 (stock is just 2 rotary) made by petit racing in the USA.

I think the laws in SA are abit too strict. SAPOL wouldnt like it if i turboed an NA car. I mean, they are giving turbo car drivers shit (look at skylines) for mucking ard with their turbos.' haha

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3555319
Share on other sites

Hi bro,

the rx8 is slow ass compared to the r34. r34 has the bullet slingshot effect when the turbo kicks in. rx8 acceleration is very linear. Makes me surprise that wheel magazine managed a 0-100 time of 6.5 or somrthing in a stock rx8. Also rx8 can rev up to 9Krpm quite comfortably. The power of the rx8 is in the 8K rpm and beyond range. At low revs, a corolla would own it!

Handling wise, rx8 feels more balanced and the car makes taking corners at high speed vv easy (you think you are going much slower)

Apparently, you can turbo an rx8, and even make it a tri-rotary. theres been a small handful of ppl in Au and quite a lot of ppl in US that have done that.

CHECK OUT THIS VIDEO. THis is a turbocharged 3 rotary rx8 (stock is just 2 rotary) made by petit racing in the USA.

I think the laws in SA are abit too strict. SAPOL wouldnt like it if i turboed an NA car. I mean, they are giving turbo car drivers shit (look at skylines) for mucking ard with their turbos.' haha

and yes, I forgot to add, the car is vvvvvvvvvvvvvvvvvvvvv thirsty, Im so surprised! It drinks more petrol than the r34 even though its only a 1.3~~!!!! I dun mind if its drinking under high revs. BUt I keep the car so slow, and its still drinking!!!

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3555322
Share on other sites

I thought you can't turbocharge them as the intake and exhaust timing overlaps as part of the Renesis technology.

See post below

...

I think the laws in SA are abit too strict. SAPOL wouldnt like it if i turboed an NA car. I mean, they are giving turbo car drivers shit (look at skylines) for mucking ard with their turbos.' haha

just tell SAPOL you bought a Mazda RX-8 "Extreme" :)

Turbo RX8

oh all you need now is a kit

MazdaRx8.jpg

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3555501
Share on other sites

and yes, I forgot to add, the car is vvvvvvvvvvvvvvvvvvvvv thirsty, Im so surprised! It drinks more petrol than the r34 even though its only a 1.3~~!!!! I dun mind if its drinking under high revs. BUt I keep the car so slow, and its still drinking!!!

turbocharging it would make it more efficient, therefore with the same fuel usage that your getting atm, you will have more power to show for it. Its not a bad idea at all, as for legalities, most cops wont pull over an RX8 anyway lol, only if your doing something wrong. That said, theres no reason why it couldnt be made regancy approved!

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3555918
Share on other sites

+1 for regency approved how about putting some R33 callipers on it :devil: then it will stop with all that power

The Extreme RX-8 looks the part too, with 19-inch wheels and tyres, a high performance racing brake package,

maybe try find out what they used

Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3556008
Share on other sites

nice buy mate, that veilside kit is awesome. Never really like veilside stuff but that looks so subtelly tuff. Put it on your list of things to get :blink:

I reckon a nice set of gold rims with a chrome lip would look tuff as mate, nice set of 5 spokers would look tuff.

Happy modding :devil:

Edited by skylineguy19
Link to comment
https://www.sau.com.au/forums/topic/199410-my-new-car/#findComment-3556413
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
×
×
  • Create New...