Jump to content
SAU Community

The Skyline and HP...... debate and comment (PLEASE NO MUD SLINGING)


Recommended Posts

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

5k, for 5k youwould be running easy every day 12s and still have a gearbox to boot. well in an r32 at least. in an r33, high flow your standard turbo, hybrid front mount kit, and ecu is about 5k in total and if your not a total gimp at drag racing you should be into the 12s and munch wrxs in the real world. (60-120+)

I fitted my turbo on Sat, and was not intending to say or post anything... but puckish has let the cat out of the bag and opened a can of worms... just to clarify....

1. i have spent no where near 5K. turbo brand new cost me 1200 and exhaust was on car when i bought it (so estimate 1500)

2. r33 with hi flows and ecu + front mounts still not doing 12's consistantly. The only one who seems to have cracked it once was Macka. Either every r33 driver is a hack(which I dont think so) or hi flow + ecu + fmic just doesnt cut it.

At a total cost of 800( link ecu) + 1200 (turbo) + 500 (tune) = $2500 i hope to run confortably into the 12's.. so your theory od chopping wrx's goes out the window :D

But theory mean sweetf*ck all, so in the next few weeks I hope to be heading down for some runs and hopefully(fingers crossed) some proof.

Until then I will shut my hole and wait.

Daniel

Originally posted by puckish

Yeah but most cars (R33 GTSt) I've seen are only in the 13's ?

Please correct me if I'm wrong.

but you said high 12s/low 13s?? which is not a solid & consistent 12 either.

take most 13 second R33 gtsts, slap a set of micky-ts on them and launch at 5-6,000. I think there'd be a few 12 second runs here and there.

This thread has so become a my dick is bigger than yours argument.

Zanga agreed - and my dick is bigger than yours ;->

Adrian - Huge difference.... remarkable. I had to put the stock ecu in because my link was tuned for small turbo and ran like shit. But still goes suprising well, even with the massive overfuelling.

Adrian would be happy to take you for a spin.......

Daniel

There is a place in Malga..... MTQ i think there called. Engineering place i believe...... they sell turbos, and if yu pay cash give you great deals. We bought two it was 1099 plus GST. So 1200 in total. You might want to see if they sell garrett.... they do sell direct to public if you pay cash.

Daniel

If we comparing cars, then surely comparing a WRX with 4WD vs. a GTS-t with RWD is pointless. That's why the WRX vs. GTR is much more relevant. And while the GTR is running 12's there's not much chance of needing a replacement blox like the WRX.

Both are great cars, but I'll have the GTR any day:D

Originally posted by IMACUL8

There is a place in Malga..... MTQ i think there called.  Engineering place i believe...... they sell turbos, and if yu pay cash give you great deals.  We bought two it was 1099 plus GST.  So 1200 in total.  You might want to see if they sell garrett.... they do sell direct to public if you pay cash.

Daniel

Which used to be Peter Fyfe of Dynamic Turbo fame but was taken over by MTQ.

Man at the front is Eric but he always sounds like he want's to kill someone( usually one of the lackeys out the back )

Had the R terbs done there and no complaints so far....

PS , if the above convo and my name is mentioned I will disavow all knowledge and then come and kill you. Hehehe

Cheers

Ken

Originally posted by IMACUL8

I fitted my turbo on Sat, and was not intending to say or post anything... but puckish has let the cat out of the bag and opened a can of worms... just to clarify....

1. i have spent no where near 5K.  turbo brand new cost me 1200 and exhaust was on car when i bought it (so estimate 1500)

2. r33 with hi flows and ecu + front mounts still not doing 12's consistantly.  The only one who seems to have cracked it once was Macka.  Either every r33 driver is a hack(which I dont think so) or hi flow + ecu + fmic just doesnt cut it.

At a total cost of 800( link ecu) + 1200 (turbo) + 500 (tune) = $2500 i hope to run confortably into the 12's.. so your theory od chopping wrx's goes out the window :D  

But theory mean sweetf*ck all, so in the next few weeks I hope to be heading down for some runs and hopefully(fingers crossed) some proof.

Until then I will shut my hole and wait.

Daniel

If there is r33s with hi flows and front mounts and ecus not running 12s, well thats either shows shit tuning or driving. and i said 60-120 which is most real world street runs around about. I can even imagine the / was in a proper plex drag with a very low 13 second wrx, He ate me out of the hole, but into 3rd and beginning of 4th i was easily out accellerating him to just pip him at the line, hense more horsepower, which is the topic you posted.

This has sadly turned into a debate on how it's cheaper to mod a wrx and that skylines are a waste of time to mod.. :P

Makes me wonder why I bothered to try to list all the mods I could think of in the earlier pages......

Still a good car and most importantly not a WRX.

My two pet hates are WRXs and Commonwhores,i don't now how many people have seen my cards and ads as they have both of these shit boxes on them as my Advertising guy did it to stir me up. Nissan or Mercs or nothing, must be a sucker for a GTR badge

(Skyline GTR or CLK GTR)but the GTS-X will have to do for now.

Originally posted by Steve-SST

Still a good car and most importantly not a  WRX.

My two pet hates are WRXs and Commonwhores

Funnily enough Steve my mechanic has said to me that the two biggest sets of wanker drivers in the world are firstly Porsche drivers and secondly WRX drivers. < Dan dont kill me they are his words and dont reflect how i feel.

But its just funny how a lot of mechanics seem to think this (not meaning to turn it into a mud slinging match either) .......

I knew this thread would turn into a mudslinging match.. hehehe...

"This thread has so become a my dick is bigger than yours argument"

"agreed - and my dick is bigger than yours "

"pet hates are WRXs and Commonwhores"

"two biggest sets of wanker drivers in the world are firstly Porsche drivers and secondly WRX drivers"

:bahaha: :rofl:

oi i didnt say it - besides i was looking at a WRX before i bought my line. But i do agree that a 4wd cant be compared to a 2wd ..... a R33 and a WRX ..... well an R33 is sometimes at least 5 years older .... so its like comparing apples to oranges .... they are both fruit but you just cant compare them to each other!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...