Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

im running a kkr560 on my rb30 single cam motor, plenum, exhaust top mount manifold and i have the internal gate flap blocked off . its making 5psi at 2500rpm and 13psi at 3500rpm

Dyno graph?

I assume you have an external gate?

  • 3 weeks later...

guys we dont have any dyno here and car is tuned in my garage by me, here is GTECH RR graph

RB480det.jpg

modifications are:

FMIC 600x300x75

APEXI FC absolutely not tuned because i dont know what to do and how todo with that:)

KKR480 on 13 PSI boost

front mount plenum

and thats all fuel pump is sdandart and exhaust is not changes still using factory setting:)

265 HP on rear

ful boost on 5000 till 7500 RPM

Edited by guricha

guricha dude, you need to get that power fc tuned. If there's no dyno's over there then road tuning is the next best thing......which you already seem to be doing.

To tune the Power FC properly you'll need on of these http://www.fc-datalogit.co.nz/datalogit.html.

And also a wideband O2 sensor if you don't have one already http://www.plxdevices.com/products/dm200/smafrcombo/

And you'll also need a laptop.

Then once you have that, you'll need someone who knows what they're doing to tune it. Unless you want to try your hand at it and do some experimenting.

guricha dude, you need to get that power fc tuned. If there's no dyno's over there then road tuning is the next best thing......which you already seem to be doing.

To tune the Power FC properly you'll need on of these http://www.fc-datalogit.co.nz/datalogit.html.

And also a wideband O2 sensor if you don't have one already http://www.plxdevices.com/products/dm200/smafrcombo/

And you'll also need a laptop.

Then once you have that, you'll need someone who knows what they're doing to tune it. Unless you want to try your hand at it and do some experimenting.

Thanks dude, is there any chance to lern how to tune it, because actualy there is no person who can tune it here i know that funy but Georgia is the one of the country who likes more BMW than Japanese:) so am expecting wideband for next week but still its problem how to tune FC, and what should be wideband air fuel ratio?

  • 4 months later...

guys i have read the entire thread and i still don't know is this a good turbo or a bad turbo?

my mods so far:

FMIC 600x300x75

Cat back 3" exaust

HKS BOV

Apexi Pod

But if i get the kkr480 i'll have a otomoto dump and Nismo front pipe to join up.

Everything else is standard atm including ECU, the kkr480 has the race actulator spring (=1-2bar)

idea's? Hame

ok with a microtech lt10 mine makes 240rwkw @ 18psi, starts hitting boost at ~2500rpm

how you make it to flow early? do you still use internal weisgeit? because mine is going to boost near 4000 but have 15 PSI

aparently the turbo i am after is set at 15psi, i dont have any other modifications apart from what u listed above, so still have stock fuel set-up etc think mine will boost late? also have stock ECU...but what u 2 just posted..they are some serious numbers. hame

so the question i am asking, is one are they easy to fit to the r33 gts-t..

and two..even if they run 15psi-22psi on the standard engine with the modifications i have already specified, will this be a problem

and three should i get my ECU remapped, and who can do it around brisbane?

they aren't hard to fit, there is a bit of modifcation 2 the water lines, cooler piping,silicon 90 degree elbow,intake piping and fab up a dump pipe

pretty simple stuff if ur mechanically minded.

buy an after market ecu powerfc or link or haltech or something along those lines.

you will find the kkr turbo wont hold boost very well, it will spike and prob end up runing around the 16-20psi mark like all of them.

and if u run this on stock ecu ur gonna blow ya car in no time:)

they aren't hard to fit, there is a bit of modifcation 2 the water lines, cooler piping,silicon 90 degree elbow,intake piping and fab up a dump pipe

pretty simple stuff if ur mechanically minded.

buy an after market ecu powerfc or link or haltech or something along those lines.

you will find the kkr turbo wont hold boost very well, it will spike and prob end up runing around the 16-20psi mark like all of them.

and if u run this on stock ecu ur gonna blow ya car in no time:)

Seriously? Blow it? Not even if i have the ECU re-mapped? I have the otomoto dump pipe for easy fitment, already have the intake pipe for it, cant afforad the aftermarket ecu atm, but will be able to eventually, if i drive around off boost alot you still think i will have problems, untill of course i buy an aftermarket ecu. I will also be putting on a Greddy intake manifold at the same time. This kkr480 is only oil cooled i'm asured of that. it is currently on a rb20 s13 with stock ecu..u think this is bad? :cool:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...