Jump to content
SAU Community

Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

in the v8's it was that the lines didn't line up properly with the rail or something like that.

and while holden has had quite a few nissan has had a few as well. do a search on silvia 200sx recalls. (not defending holden, just making a point to the green eyed import fan bois, LOL)

the aussie s15 has had zero recalls since landing in australia

from 1989 to present 45 nissan recall campains have been put out through all the nissan makes in au

look here

modelshttp://www.recalls.gov.au/search_recall_namesearch.php?product_name=nissan&Submit2=Submit

heres all the skyline recalls from japan from 1989 to 2004 woopie 9 recalls

http://dogandlemon.com/site/japanese-vehic...p;model=SKYLINE

stagea recalls

http://dogandlemon.com/site/japanese-vehic...mp;model=STAGEA

and i cant find any recalls for any silvia (can any one else help)

Edited by boot_it

parents have a ve s.

power=sux balls.

but other than that its pretty stable and good to drive.

but has massive blind spot= pillars are limiting, and so is the high boot thru the rear window. cant see much through the rear mirror

I would rather Holden recall them, than to have the problems get worse over time.

People see recalls as a bad thing, when really it's not. Look even Jap cars get recalled (Oh Noes!!!!).

I think alot of people like to have a dig at Holden just for the sake of it, but quietly shut the f**k up when something with their own car goes wrong.

Edited by RyanVLSL
I would rather Holden recall them, than to have the problems get worse over time.

People see recalls as a bad thing, when reallly it's not. Look even Jap cars get recalled (Oh Noes!!!!).

I think alot of people like to have a dig at Holden just for the sake of it, but quietly shut the f**k up when something with their own car goes wrong.

The fact is they spent a shit load of money on them and a pissy little thing like fuel line f**ks up i thought all that desert testing would have brought that to light!

The fact is they spent a shit load of money on them and a pissy little thing like fuel line f**ks up i thought all that desert testing would have brought that to light!

That's exactly right. It is a pissy little thing, but atleast they picked up on it.

I know it cost alot of money, but they can't pick up every single thing when they are mass produced.

I reckon the new Falcon is going to suffer the same way.

Ill admit, i dont mind Holden but the commodores they have brought out in the past couple of years look/drive like pos they shoula improved on the old VL Turbo.

I had one and the thing never died, started first time everytime and went harder than the new commy too

That's exactly right. It is a pissy little thing, but atleast they picked up on it.

I know it cost alot of money, but they can't pick up every single thing when they are mass produced.

I reckon the new Falcon is going to suffer the same way.

Yeah but that pissy little thing can cause a big f**k up you get fuel right the first time.

All cars have there problems i just like picking on holdens

Yeah but that pissy little thing can cause a big f**k up you get fuel right the first time.

That's the reason for the recall, so they can fix it.

Or would you much rather hear of people dieing, because their V6 VE caught fire as a result of the faulty fuel line?

That's the reason for the recall, so they can fix it.

Or would you much rather hear of people dieing, because their V6 VE caught fire as a result of the faulty fuel line?

As i said get fuel right the first time and then we wouldnt even be talking about it and the fact that they have had other recalls just makes the matter worse.

As i said get fuel right the first time and then we wouldnt even be talking about it and the fact that they have had other recalls just makes the matter worse.

Well if every manufacturer got it right the first time, than we would have no reason to discuss recalls would we? But the fact is it does happen.

I wonder what the reaction would be if this happened to Nissan? Doubt it would though, because Nissans are the greatest cars ever built, that never have any problems. *cough*

Edited by RyanVLSL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...