Jump to content
SAU Community

Real Time Gps Gprs Gsm Car Tracker Alarm Tracking


Recommended Posts

  • 3 months later...
  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

had a few breakins in adelaide lately, is it still available? or where do i look elsware?

Too right. Had my S2 stolen the other day.

A quick testimonial follows...

It's a pretty nasty feeling, walking out from work on a Friday, to find not a stagea in your parking spot, but a weather strip. Straight away you can guess what happened.

So straight away I called work security; they were absolutely $#(*@ useless. I have absolutely no faith in them now whatsoever. Among other things, I had to call two different companies, and I had to explain to them where the carpark actually was! It is right behind the building where I work. And I work in a HOSPITAL. For Chr!st's sake. Rapidly losing hope...

Then I remembered the GPS tracker which I had installed some months ago; a couple of sms's later and I had GPS CO-ORDINATES OF MY CAR'S LOCATION. That was absolutely amazing; I can't tell you. I also got a speed of 0km/h reported so I knew it was stationary. I called the cops and they were on the scene within about 20 minutes; there was a busted ignition lock, and broken weather shield; estimate a conservative $500 worth of damage? I was bloody lucky. Some fingerprints were found (I had happened to have cleaned and polished/waxed the car the night before, and I never touch the glass etc. with my fingers... felt like I was doing all the work here!) The Police were impressed with the tracker's job, and price. "Gee that ~$250 was worth it, wasn't it?". It was, it paid off about 100 times over, literally.

Cheers again gtr_z for an awesome unit about $500 below the retail for something like this. Honestly guys 'n' gals, my S2 is standard except for some second-hand rims that are worth less than half of what most guys are putting on their stags, and I am worried about theft. Imagine if your stag is modded, even seriously modded... you could've invested easily twice as much as me. Or more... get one of these units, and hide it in your stag! Then it is only an sms away... YMMV.

/end rant :thumbsup:

Edited by DaveB

Wow, good story.

You should have had it wired into your alarm (if you had one?) so you would have known as soon as your window was smashed.

Just a Q,... when you got the sms with the coordinates, how did you then locate your car? Did you duck back to work and use googlemaps, or grabbed a street directory from someone? Or were the cops able to use the coordinate themselves?

Wow, good story.

You should have had it wired into your alarm (if you had one?) so you would have known as soon as your window was smashed.

Just a Q,... when you got the sms with the coordinates, how did you then locate your car? Did you duck back to work and use googlemaps, or grabbed a street directory from someone? Or were the cops able to use the coordinate themselves?

Two issues with wiring it into the alarm: I didn't have one, and I accidentally left my phone in the car. So I had to go home and use another phone. I looked up the gps co-ordinates myself and then called the police straight away; I just gave them the incident number and the GPS co-ordinates, and they were able to handle the rest.

I did notice though that street directories have lat/long printed in them; I could've I suppose used something like that if I was stuck.

I asked one of the officers if they could use google maps in their car and was told that base would do it, and they'd let them know the location (I don't think some squad cars have google maps :devil:

DAveB

Im also very keen, sounds like a great idea, I have a great alarm but If you are too far away from the car to hear it then its not much good. No one else cares when they hear alarms going off these days either.

Can you PM me with details if this is still going?

Just letting everyone know that due to the falling Australian dollar, the price will have to increase accordingly (probably around 25% to 30% more at the moment). Please PM me if anyone is still interested.

Edited by gtr_z

I have a newer & better version now (photo attached, also available in black) with 3 +/- inputs for car alarm alerts/triggers and 1 output with a relay for remote immobilisation as well as GPS last position feature in case it loses the GPS signal (eg. if taken inside a deep underground carpark it will give you the GPS coordinates of the carpark's entrance). As usual, the unit and all the external antennas can be hidden under pretty much anything in your car since they do not need any direct view of the sky.

There's also another type of unit going around which I would not recommend - the all-in-one GPS GSM alarm unit with remotes, this sort of unit is more common and older. It's an all in one car security system without 2/3 point immobilisers (it only has 1 relay that won't even get activated when you press the remote), no all black wiring and/or other features, the security measures are poor and do not meet any standards for a car alarm system. So I decided to get a decent approved car alarm system such as Mongoose m80s that has 3-point immobilisers, all black wiring, code-hopping remotes and other features that meet Australian standards and then added the tracker with its alert features on it. Much better package this way. If I used this all-in-one car alarm system, I wouldn't be able to install a proper and proven car alarm system from a known brand. There's also a cheaper unit with a weaker and less sensitive internal GPS antenna built-in.

post-42228-1227625079_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...