Jump to content
SAU Community

Recommended Posts

75kg puts you in direct competition with the one they call angry dwarf.

He's benched double bodyweight, squats close to triple and deadlifts just over triple

nice abs though. :D

Emad? he's a top bloke, was giving me some deadlift advice and pumping me up... if that guy told me to pick up the bar in my teeth and probably do it... fckn beast

75kg puts you in direct competition with the one they call angry dwarf.

He's benched double bodyweight, squats close to triple and deadlifts just over triple

nice abs though. :D

okayguy.jpg

What is he, like 5'3?

Nick - nah a younger guy from up here in QLD.

I was 89.6 on saturday.

but since injury after injury, I've decided no more comps this year.

I'll spend the time to recover and use more reps for a while.

I'm looking to compete next year in the 83kg group.

Birds - yeah about that................... wide.

Emad is the best 75kg raw lifter in Australia, ever. The only guy to total 600kg, and he's done it twice, not shitty comps either, at a Nationals and a Worlds

He has no competition at 75kg so he's moving up to the 82.5kg class

If you mean Mike, Tolga, he went head to head with Emad at ProRawThree in the 80kg class

Mike totaled 615kg and Emad went 622.5kg

Its a pity Emad wont compete at 75kg again because his totals were done with a bad shoulder that had just been reconstructed. He only benched 120kg at Worlds but benched 150kg at ProRawThree.

Maybe if someone steps up and takes his All Time Australian 75kg record, all Feds, he will come back and reclaim it.

His best lifts at between 75-78kg are 232.5kg squat, 152.5kg bench and 270kg deadlift

I don't understand how it can be counter-productive. As I've said before I monitor my calories on a day-day basis so that I am eating enough to cover training/recovery.

I don't do cardio.

I eat 210g protein, 400g carbs, 120g fats per day 7x a week.

It's not a 'slow way' its the smartest way. Eating more than what your body needs is pointless.

lol not to be too much of a dick, but 210g protein sounds like a bit more than your body needs.

Agreed Nick - I only use bodybuilders as an extreme example of how diet affects muscle growth and training in the gym. On a closer to home level, we're talking a couple kg of fat that might make your abs less visible or disappear (as I said, trying to keep <10% and gain muscle is harder and takes longer than not caring what your BF% gets to).

From my personal experience, it was a lot easier for me to get through workouts at 89kg than it is at 79kg...and I was making more strength gains back then because I had a larger supply of fuel. That being said, I love the way I look now and wouldn't trade it for extra strength or body weight. So in the end, it's whichever makes you happy, but there are compromises everywhere.

hehe bodybuilders have no place here... to bulk - Dbol and tons of food

to cut - train hard but tren harder

210gms too much?

f**k, I better tell my lifters lol

In all seriousness, you should match your training to your diet, not the other way around like most do

I find that most lifters should go to the gym and just do 1 set of calf raises then go home

Markos, it would depend on his level of activity and conditioning obviously (not to mention body type and figures), so how much would you recommend then?

While 210g may be too much for him, it doesn't mean it would apply to all of your lifters.

For example I'm 87kg, lifting 5 times per week. If I consume 210g that's 2.4gr/kg/bw which is a pretty damn solid intake and my body sure wouldn't effectively use more unless I started training twice a day.

The minimum I recommend for serious lifters is 2gms per LB of bw

Max has to squat 200kg x 10 next week weighing 85kg.

He would have around 400gms a day, he trains 6 x week with heavy weights, no fluff at all

Interesting. Don't take this as a smart-ass reply (because it isn't, i'm rather intrigued), but how did you come to these figures as being legit?

I've researched and researched, but I can't seem to find any solid evidence that a relatively high protein intake as you mention is beneficial.

All the research I've found simply states that too much at any one time is excreted, but they don't tell you about a high intake over the period of a whole day.

At the same time though, I should note that no one is yet to prove a high intake is of any harm on a healthy individual.

Do you have any articles backed by proper research I could have a read through?

Again, not challenging you, rather trying to gain some insight.

lol not to be too much of a dick, but 210g protein sounds like a bit more than your body needs.

Carbs make me bloat/full all the time, so I would rather increase protein macro and have less carbs. It still falls under the general bb'ing guidlines of 2-3g per kg of bodyweight.

You should question EVERYTHING Tom, I do

2gms per lb is a measurement I read about 30 years ago in BB magazines

Anyway I do my own research, real world stuff.

Nearly 3 years ago I had Max and Dim training side by side in the gym, same program

They were having a race to a 100kg bench press, both weighed around 68kg

Max's eating was perfect, Dim was 25 and not paying much attention to nutrition, regular guy with protein drinks and 3 meals a day, I'd say around 200gms of protein a day

Dim beat Max to a 100kg bench by about a week.

Three years later Dim still eats the same, though he weighs 78kg. Max weighs 85kg. Dim benches 107.5kg on a very good day. Max has continued to increase his protein as he got heavier. He now benches 155kg

They train in the same gym, same programs, same coach, only difference is diet and lifestyle

I dont need a book or a lab coat to tell me where the difference lies

I am very priveledged in that when I give advice I have hundreds of lifters to draw experience from, most only train themselves

I reckon 50-60gms per meal is a good amount to start with

Max cooks 3 steaks every morning after eating 5 eggs and 5 bits of bacon for breakfast, washed down with a home made get big drink. He boils a pot of potatoes and has steak and potatoes for meal 2,3 and 4, peanut butter sandwiches next, protein drink during training, dinner at home, more milk before bed

If Dim did this, he too would be benching upwards of 140kg, but he doesnt

Woah, I thought my diet was a pain in the ass to upkeep.

Woaaahhhh... you let girls lick your a-hole?

Thats kinda nasty.

Girls I don't plan on kissing again ;)

You should question EVERYTHING Tom, I do

2gms per lb is a measurement I read about 30 years ago in BB magazines

Anyway I do my own research, real world stuff.

Nearly 3 years ago I had Max and Dim training side by side in the gym, same program

They were having a race to a 100kg bench press, both weighed around 68kg

Max's eating was perfect, Dim was 25 and not paying much attention to nutrition, regular guy with protein drinks and 3 meals a day, I'd say around 200gms of protein a day

Dim beat Max to a 100kg bench by about a week.

Three years later Dim still eats the same, though he weighs 78kg. Max weighs 85kg. Dim benches 107.5kg on a very good day. Max has continued to increase his protein as he got heavier. He now benches 155kg

They train in the same gym, same programs, same coach, only difference is diet and lifestyle

I dont need a book or a lab coat to tell me where the difference lies

I am very priveledged in that when I give advice I have hundreds of lifters to draw experience from, most only train themselves

I reckon 50-60gms per meal is a good amount to start with

Max cooks 3 steaks every morning after eating 5 eggs and 5 bits of bacon for breakfast, washed down with a home made get big drink. He boils a pot of potatoes and has steak and potatoes for meal 2,3 and 4, peanut butter sandwiches next, protein drink during training, dinner at home, more milk before bed

If Dim did this, he too would be benching upwards of 140kg, but he doesnt

Great insight, thanks for that Markos :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...