Jump to content
SAU Community

Recommended Posts

A carb is not a carb. A sugar drink is not the same as a bowl of oats.

1000 calories of big m is not the same as 1000 calories of steak.

Your body utilises proteins different to sugars, and fats different to either also.

I mean, that's pure basics. Why do you take a protein shake after a workout and not a tub of lard??? It's common sense, your body uses different

macro's for different things.

And fruit is not a ball of sugar. It's natural, comes from the ground, is full of vitamins, minerals, antioxidants, fibre and is just down right good for you.

A healthy body is a happy body, and a happy body is ALOT easier to work with.

While you didn't directly say everything that comes from the ground is good for you, in certain situations in life - like when making a statement or declaration to police - this wording could be construed to mean exactly that.

A statement to police, you've got to be joking.

I was talking about fruit, you know, what you buy at a fruit shop.

Seriously, if you guys wanted to act like retards, then you'll be treated like retards.

F this i'm out

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

Coz of the current tone of this thread, I'm not sure if you're being sarcastic or not lol.

I'll assume you're not, so yeah over the last couple of months I've focused much more on incline press than just flat bench. Likely culprit.

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

Did you not used to have them? I doubt I could progress without them on bench!

Loving 1.25kg plates...been using them to step up bench and, whilst I do notice they are on there (2.5kg increase combined)...after a week or two of the new weight, I'm doing the same reps as I did before I put the plates on.

I can't bare putting those little f**kers on... I know I should but they just look so silly!

yes, the usefulness of small weights are so underestimated - people always worry about how much weight it looks like they have on their bar (this is so stupid) but screw that, use those small weights to make your improvement each week!

edit: HAHAHA nick i was typing that and as soon as i posted, yours appears before mine: point illustrated.

Edited by darksky34

Did you not used to have them? I doubt I could progress without them on bench!

could if you squatted more....

have looked for those little plates, swear there are only two at the gym i go to

Troy, whatever you're doing, keep doing it, and share some of it around, f**k. It's like you grew a chest in 1.5months.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

Did you not used to have them? I doubt I could progress without them on bench!

They were always there, but pretty much what Nick said. There's some psychological barrier about using them, like you're not making much difference by putting them on or it'll be a pointless increase. Only ever stepped up with 2.5kg or 5kg plates. But when you rationalise it, 1.25kg plates, even every 2 weeks is a good increase. You give it 2 months and that's a potential 10kg on your bench, just takes patience. I doubt that by adding 10kg straight up, you would accommodate the reps after 2 months (unless you're a noob still getting noob gains).

Now I'd use 500gm plates if I had them!

Nick start using them, they are a godsend.

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

dat der celltech?

Edited by GHOSTrun

when I first looked at the pics I was thinking pretty good improvement for 12 months... then I saw his post, 6 weeks! WTF dude

I can't say it's exactly 6 weeks. The first picture was taken well before the "cut" and switch to incline press, though I looked almost identical to it when I started the 6 week period regardless. The pictures were more to illustrate fat loss (which the first one doesn't show very well).

More or less, yeah that change was 1.5 months though, give or take from inaccuracy of first picture.

dat der celltech?

NAH BRO IT WAS ALL THE ALBUTEREX.

hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The 32 still sits untouched with the broken gearbox. So a little off topic but not worth having a whole new thread. The daily starlet has gotten back on the road after 9 months. Suspected blown HeadGasket at a track day resulted in a bit of scope creep rebuild. The motor got a full tear down, pressure testing, machined for MLS HG, ARP head bolts, new bearings, all new seals etc also noticed some fatigue on the stock exhaust manifold so obviously the answer was a steam pipe manifold and highflow turbo. The exhaust was also looking tired with some rust holes. So I got a slightly over kill system made up consisting of Vibrant resonator and muffler with a highflow cat. The new highflow turbo had a larger inlet so instead of adapting the old intake got a case of the might as wells and had a nicer alloy intake made After the run in was finished i bought a (probably considered retro/vintage) EBC becasue "might as well"
    • Pretty stout result. How much boost? Anything left in it?
    • Just dropped the car off at MX5 Mania to install the intake plenum and give it a little retune  My impatience hates the waiting game 
    • SAMSONAS      Just saying      U know and we know U wanna     Just a matter of time....
    • This is kind of what I expected given the use case. I took my liners out for track days too.... It makes me consider just getting a diffuser and not bothering with the arch liners themselves. For the most part I would like to avoid water/mud/jank splashing up from under the car onto the bottom of the engine, lines, wiring, etc etc. (but brake ducts are cool too). Especially given this post on SAU here: Where it's implied you have to cut them because the actual tub is different? Which is pretty damn worrying because that is where the liners rub in a GTR with wider wheels... I definitely won't want to pay $2000 for plastic then cut them up. It also means said wider wheels rub on the tub in a GTT? FML. That said, I have found some evidence someone ran a 295/30/18 without scrubbing these liners. (and by extension.. the tub).
×
×
  • Create New...