Jump to content
SAU Community

Recommended Posts

Dan tore his pec pretty badly earlier in the year. He switched to reverse grip to take the load off his pec, and found out he's stronger with that grip.

His PB when he tore it was 167.5kg, done on the same session he tore his pec, I think he'll get 185kg next weekend

I've watched enough PTC videos to know you know what you're talking about when it comes to strength training and getting real results. It's why I try and follow your method of training.

When you put it like that, I now understand why you say that we aren't going to get to that level training by ourselves in commercial pleasure spa gyms. Explains a lot actually about the difference of actually training there, rather than just seeing it as you teasing us with the unattainable for the sake of it.

I do believe you get it now Bozo

You could go out into the street and kick a footy around for hours, and never be as good as the guys in the AFL, even Richmond players lol

So PTC isnt simply a gym, so much more

We have lifters train at PTC in Carrum Downs that live in Caroline Springs, Elwood, Fitzroy, Croyden, Templestowe.

Looks like a gun teen lifter is moving from Adelaide to Carrum Downs to simply train with us before the end of the year.

You have got it bozo

Im not 'training' at the moment . I am mucking around. I will be training when i get serious and go to a gym

Not what i do at the moment

All these factors are in context that i mention. Training. Not pissing around

Edited by rev210

Over doing it = undereating or sleeping

Exactly this. It's less "over training" and more "under resting" so to speak. Another reason I got such got results when I was unemployed lol, had all the time in the world to recover.

That exercise is how I injured myself

Standing press is a good movement , however it needs good technique like all good movements as it's a compound one. It's not hard to do but, you should understand it.

People get taught to do it wrong or not at all. The stabilisation strength of the upper back and shoulders is very important. If you are managing a challenging weight , then not doing things correctly can hurt your upper back/spine. Mostly people do the basics wrong. Not drawing in lots of air and stabilising the core (abs are tense but, pushed out). I. Also,pre-fatiguing the shoulder stabilsing muscles with things like volume bench press or other isolation shoulder movements beforehand is a fail.

Behind the head is not a beginners variation let alone snatch grip width.

It was my first exercise of my program so I wasn't pre fatiguing with other volume work, but something went wrong when I started doing 25kg. I used to have alot of people ask me why I was doing behind the head.

I don't think it was this exercise that got you. You were using fine technique last I saw you do it. It could have aggravated a predisposition, certainly.

So my shoulder went twaannngg during the exercise and it wasnt this exercise that has left me screwed?

What was it then?

It would be the technique then Leesh. Were you also taking the bar off the ground with a 'clean' or did you take it out of a rack? Picking it up off the ground is good training but, you need to know how to do it right also.

I did test of a few 100kg military press sets today (I clean & press these) ,speaking with some reasonable past experience. I would not consider behind the neck press at any weight a part of my training if I was to seriously bother. It requires more scapular strength to stabilise if you do it right and stresses the rotator more, pretty much for no other reason than to be a hero.

Once you get better drop the behind the neck thing. You can get tips on Military press if you want to do it correctly, I think it's a good compund movement.

It would be the technique then Leesh. Were you also taking the bar off the ground with a 'clean' or did you take it out of a rack? Picking it up off the ground is good training but, you need to know how to do it right also.

I did test of a few 100kg military press sets today (I clean & press these) ,speaking with some reasonable past experience. I would not consider behind the neck press at any weight a part of my training if I was to seriously bother. It requires more scapular strength to stabilise if you do it right and stresses the rotator more, pretty much for no other reason than to be a hero.

Once you get better drop the behind the neck thing. You can get tips on Military press if you want to do it correctly, I think it's a good compund movement.

clean and jerk to get it up behind my head.

So my shoulder went twaannngg during the exercise and it wasnt this exercise that has left me screwed?

What was it then?

ALike I said, you were likely predisposed...this exercise may have simply been the straw that broke the camel's back. It'd quite a strict movement; one of the reasons it is done behind neck, because there is little variance in the range of motion. As long as you're taught and execute it correctly, this makes it one of the safer shoulder exercises. But no amount of safety in a range of motion will save you if not everything is sitting right when you do it.

Just use a squat rack when you get back into it. get the technique sorted on the standing press. It's pretty easy with practice and one less thing to worry about while getting it perfect.

So are you suggesting to use the squat rack and do it behind my head still?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...