Jump to content
SAU Community

Recommended Posts

To all you deadlift mofos

You guys haven't done a proper deadlift unless you use this fat 3" bar

post-5053-14029812266848_thumb.jpg

I've done it in the past

It def helps your grip strength and lift more and next time you pick up an generic oly bar you will think its a tooth pick

To all you deadlift mofos

You guys haven't done a proper deadlift unless you use this fat 3" bar

attachicon.gifImageUploadedBySAU Community1402981225.936957.jpg

I've done it in the past

It def helps your grip strength and lift more and next time you pick up an generic oly bar you will think its a tooth pick

how much does it weigh?

That's ol school thick bar btw

You can get lighter thick bars

I could barely use a 3" bar cuz I'm not tall and found that a 2" thick bar was best fit and weigh a lot less than that ol dinosaur bar (under 25kg)

Yeah fair enough. I like having a 20kg bar because It's easy for me to do my sets with 20kg and 10kg plates. I have 20's on each side for warmup, I then add 10's on, then I have 2 20's, then 2 20's and a 10 either side for my max weight. Then take the 10's off and do 100kg for volume.

Yeah fair enough. I like having a 20kg bar because It's easy for me to do my sets with 20kg and 10kg plates. I have 20's on each side for warmup, I then add 10's on, then I have 2 20's, then 2 20's and a 10 either side for my max weight. Then take the 10's off and do 100kg for volume.

good stuff.

I like the gym banner btw - makes perfect sense

haha yeah, dungeon rules.. I love the gym to bits

lol I used to call my old gym the dungeon (wasnt called that but that is what I refered it to as being)

Plain and simple - no spa, no yoga / pilates mambo jumbo, no sauna, weights were very old but useful with dumbels up to 50kg (not that I ever lifted that - but 40kg I did lol)

cardio equipment - basic stuff treadmil, stepper (one of favs), cross trainer (also a good one) and bike and rowing machines)

Was a great gym - and now I just realise how much I miss it :unsure:

Not one piece of cardio at dungeon, we only got a couple of mirrors the other day too

mirrors lol

You'll probably spend more time checkin yourself out than working out

Send them back and get more weights instead

Grip used to be my problem for deadlifts, giving out before my back did, but with mixed grip and chalk it's my back that gives out first.

So I won't have a bar of it Ants...know what I'm chalkin about?

Grip used to be my problem for deadlifts, giving out before my back did, but with mixed grip and chalk it's my back that gives out first.

So I won't have a bar of it Ants...know what I'm chalkin about?

could still try it - bar costs $40

Just drop weights off and see how you go

It will improve your grip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thanks for that mate always a good help
    • It's not really a calibration issue, if the voltage is really at 2V. If the voltage is 2V, then that's what the TPS is putting out, and the Haltech is seeing that and 2V is about 40% open (you know, between 0.45v being closed and something close to 4.5V being fully open). So, that would suggest that the TPS is maladjusted, on crooked, something something something. Or a wire problem.
    • Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
×
×
  • Create New...