Jump to content
SAU Community

Recommended Posts

Tried to crack the 500# the other night, pissed that I almost got it but missed.



Then did some reading of this excellent article and realised how I'm setting up with my hips too low, which is highly inefficient. Have a read, it makes good sense.

Why your Deadlift Setup is Wrong
http://www.powerliftingtowin.com/powerlifting-technique-deadlift-setup/

> Bar over mid-foot
> Hips high enough that arms make a 90 degree angle with your lats (well, the direction the lats are pulling, anyway) which permits proper lat engagement and reduces unnecessary "moment" of leverage, also reduces distance between bar and hips which decreases energy required to lift (bar will track a straighter path).
> Bar slightly behind shoulders

Thanks fellas. 220 is my max, at 85.5kg.

Made some adjustments to my setup based on that article and I found the lift went much smoother, it felt more efficient with a higher hip starting point.

Mkn, I guess that just means you need to work up to it again slowly. Going for a DL PB there's always some psychology in it, but for me it's nothing like the squat. Going heavy on squats is really based on confidence I find.

I love my 1.25 plates, every so often go for new PB and have a win, I dispise not making a lift, my next attempt at some PB's will be in 6 weeks.

I feel for me getting a 1.25 or 2.5 PB's every couple of months is better then going to heavy and risk injury or failure.

My last PB was the 90 clean and press, training weight for 6 to 8 weeks then go for 92.5.

Have I said I hate missing lifts.

  • Like 1

You've also got a point Mark, I was just sort of joshing. If you take a leaf out of Jim Wendler's book, then one should try and steer clear of ego-lifting. And programs like 5/3/1 encourage the achievement of PBs no matter how slight, and the progression of weight from week to week or cycle to cycle, in small denominations. I just hate standing next to the barbell trying to calculate in my head what plates I need to give me the exact total I want, then having to pull about 2 or 3 off each side for the next set to reconfigure them for another odd numbered total.

You've also got a point Mark, I was just sort of joshing. If you take a leaf out of Jim Wendler's book, then one should try and steer clear of ego-lifting. And programs like 5/3/1 encourage the achievement of PBs no matter how slight, and the progression of weight from week to week or cycle to cycle, in small denominations. I just hate standing next to the barbell trying to calculate in my head what plates I need to give me the exact total I want, then having to pull about 2 or 3 off each side for the next set to reconfigure them for another odd numbered total.

An increase of 2.5kg to a 220kg deadlift is a bit over 1%...maybe not enough for your muscles to notice it (I bet they will) or be a bragging point to someone else, but that's the point...you do this minuscule increase another 3 times and in 2 weeks you've cracked 230. Now we know weight lifting isn't linear, so we know you can't just keep on doing this forever (even 2.5kg a week is 120kg across the course of a year); there will come a point where you can lift xxx but can't lift xxx+2.5kg, and then suddenly the 1.25kg plates aren't a pain in the arse to calculate, they're a pain in the arse to lift!!!

Bank the 225 or 222.5 and go up from there. 1.25kg plates added 20kg to my deadlift 1RM, as opposed to stepping up even 5kg at a time.

That is the worst logic I've heard for someone trying to get stronger lol

My point was he got the 220, got the 230 above the knees. Yeah he could have just chucked a couple kilos on 220 and made the lift. But now he knows his limits and sticking points. Unless it's a comp it doesn't really matter if you miss a lift.

If you make the 225 you end up stronger from succeeding with the lift. Getting stronger happens with progression and a failed lift isn't progression; an increase in amount of weight lifted is. Case in point: his PB is still 220. My point is that a 10kg leap is unnecessarily large when shooting for a new pb at the kind of weight he's doing, hence recommendation to give a 5kg or even 2.5kg increase a go and bank some more weight. Then the leap from that to 230 isn't so big.

In a competition, is ironically where you would put up a number that you don't know if you can get or not...on the 3rd lift.

I understand the point you're putting across, which is also right.

The one I was trying to make us that it doesn't matter if he makes the lift as long as something is learned from it.

If he'd have done say 225 and made it he may not have pursued the research that showed he needed to change the start position slightly, which will benefit him later on

I wouldn't argue with points made but also wouldn't argue a crack at 10kg extra on occasion.

Failing teaches you things.getting the PB's up becomes mental.Learning to persevere and back yourself are very impotant. An old training technique is to tell someone there is less weight (or more ) on than there really is. Numbers can intimidate or distract you ,making you lose effectiveness.

I get you Birds. But problem is, I would be unlikely to be stepping up my weight successively for week after week, particularly if I was following a program like, say 5/3/1, which would involve a cycle of 4 weeks with the 4th and final being a deload. When you also factor in the other variables like diet, sleep, stress, other physical activity and lifting on the day/week in question, it's really not a linear progression (even if the line of best fit would resemble more or less a straight line if one were to plot their calculated or actual 1RMs) but instead there's a lot of randomness to it. I happened to feel pretty strong on the day. Having said all of that, I acknowledge 10kg was a significant bump up from my previous max. That previous max of 220 btw, was done back in November. My sets this time were 70x10, 70x10, 110x6, 150x4, 190x1, 210x1, 230x0

All I'm saying is you would have had 225, prolly even 227.5; a new PB plus taught your body to lift that much weight. Not saying you were wrong to try a 10kg step up...go for your life...everyone has failed a 1RM this way before and you almost had that lift - it was just a suggestion for your next 1RM attempt, that you try a smaller increment. It's an easier physical and mental battle. Bank the weight away throigu a full range of motion and be happy with an increase/progression - it's amazing how much stronger the body can grow with even a 2.5kg jump in the 1RM. It can easily add a couple of reps to heavy volume sets during your next session, which in turn help your 1RM.

Regardless, you will one day get to a point where to realistically progress in the 1RM, all you can do is add 2.5kg to it. As we all agree, lifting weight is not linear, so one day it will plateau and you will need to resort to this kind of increment anyway.

I'm actuallly surprised you lost the lift at the point you did - very close to lockout and thought you were there. If I can get a deadlift that high I can usually lock it out. My sticking point is just above the knees where I struggle with a 1RM. I need to hit the rack pulls.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...