Jump to content
SAU Community

Recommended Posts

On average, I'd *attend* the gym 5-7 times a week, though this is mostly due to each session being somewhat restricted on time and then having to complete it next session. Like if I go in the morning before work, I might manage to get 2-3 exercises in (try to superset everything if I can just to make use of time), which isn't quite enough for a push/pull/legs split, so I'll finish off the session on my lunch break (equally as short timeframe available). It's a bit shit, but it works for now until I find more free time and less stress

5+ workouts a week? fk that, where do you guys find the time and how does that not mess with your recovery...unless you're doing one exercise each day? That's like a competing powerlifter training schedule.

Used to workout 4 days a week and since having switched to 3...I'm never going back. Sometimes even just twice a week and it doesn't impact much if it's occasional. Also only 4 exercises total.

Best I've ever looked and strongest too. I've reckon devoting a lot of time to those major exercises is the way for anyone but an advanced/competing bodybuilder or powerlifter. Keeping it simple and majoring in the majors.

Now watch as I nazi everyone into my workout regime again...

You don't really like reading, do you Adam? hahaha I said the whole reason I have that many sessions per week is due to each session being stupidly short due to time restrictions (I have plenty of free time, just never in decent chunks except for weekends, and even then....) so I'll get like 30-45 mins of gym time before work (including setting up, and showering after. Requires getting up by 5:30am); about the same give or take (usually take) over lunch, but not ever day; then a little bit more of an arvo, but I'm often finding myself running errands and generally caught up with shit that I'll rarely be interested in using the spare time I have in the arvo for gym as I desperately want to zone out and relax after dealing with potatoes all day.

So really I'm getting in maybe a little more time than yourself, just annoyingly spread across more sessions.

5+ workouts a week? fk that, where do you guys find the time and how does that not mess with your recovery...unless you're doing one exercise each day? That's like a competing powerlifter training schedule.

Used to workout 4 days a week and since having switched to 3...I'm never going back. Sometimes even just twice a week and it doesn't impact much if it's occasional. Also only 4 exercises total.

Best I've ever looked and strongest too. I've reckon devoting a lot of time to those major exercises is the way for anyone but an advanced/competing bodybuilder or powerlifter. Keeping it simple and majoring in the majors.

Now watch as I nazi everyone into my workout regime again...

Mon chest and biceps

tues quads

wed shoulders

thurs back n tri

friday hams anf calves

sat arms

If i have time off i have to ease back into it but body gets used to recovering in that time

Always about an hour in the gym except for shoulders they about 40min but my strongest body part too

My shoulders are shit :(

Lots of side raises with straight arms none of this bent arm bullshit you see 80% of people in the gym. Dont have to be heavy either. mine grew most with 7-10kg dumbells. Then burn them out after with with the cables again not heavy 5kg max and then drop it down and rep it out.

Front raises you can go heavy and form can slide a bit once you go heavier.

Even better superset both.

I dont actually shoulder press that much. More so a few light sets to warm up and one heavy set and thats it.

It was amazing to see the difference and how fast. Only over a few months. I seriously looked about 15kg bigger with wide shoulders.

Been months since i have tried a single i think the last was 140kg i would be thinking close to 150 now but like to focus on incline with dumbells as its a lot more comfortable and with my bodybuilding style of training builds muscle where i want it.

But did 120kg for 6 sets of 8 reps few weeks ago training with a mate when i was crook too. I have no idea where the strength came from. Just lucky i kept the food up a guess. Last set was pretty sloppy and needed a spot for last 4 reps or i would have bailed it.

Dead has stalled the last 6 months at 220kg and when ever i go heavy lower back gets real sore. Pretty sure its form related. Going to try attending a powerlifting gym a mate trains at when im feeling 100% to get some 1RM happening properly as form is an issue once i go heavy with dead and squat.

Lots of side raises with straight arms none of this bent arm bullshit you see 80% of people in the gym. Dont have to be heavy either. mine grew most with 7-10kg dumbells. Then burn them out after with with the cables again not heavy 5kg max and then drop it down and rep it out.

Front raises you can go heavy and form can slide a bit once you go heavier.

Even better superset both.

I dont actually shoulder press that much. More so a few light sets to warm up and one heavy set and thats it.

It was amazing to see the difference and how fast. Only over a few months. I seriously looked about 15kg bigger with wide shoulders.

Yeah, I've been supersetting 1-hand standing lateral raises with my military press :) arm *slightly* bent as perfectly straight doesn't quite feel right in the elbow, but I definitely know what you mean by "not bent" and I certainly avoid that haha. Anything that makes an exercise EASIER is generally the WRONG THING to do.

Been months since i have tried a single i think the last was 140kg i would be thinking close to 150 now but like to focus on incline with dumbells as its a lot more comfortable and with my bodybuilding style of training builds muscle where i want it.

But did 120kg for 6 sets of 8 reps few weeks ago training with a mate when i was crook too. I have no idea where the strength came from. Just lucky i kept the food up a guess. Last set was pretty sloppy and needed a spot for last 4 reps or i would have bailed it.

Dead has stalled the last 6 months at 220kg and when ever i go heavy lower back gets real sore. Pretty sure its form related. Going to try attending a powerlifting gym a mate trains at when im feeling 100% to get some 1RM happening properly as form is an issue once i go heavy with dead and squat.

That's pretty bloody strong! Hard for me to imagine repping 120 like that, most I've done is 2 reps. But then once upon a time I didn't think I'd be pushing 100 for 10 and that's now a reality.

What do you weigh these days?

Doing 8/9kg 4 sets of 10-12 reps. It's not too heavy for any muscles being recruited; it feels like it's trying to bend/twist my elbow in such a way I cannot counter it with muscle tension. Definitely still hammers the whole deltoid group as well as traps though, so I don't think I'm taking away from the movement too much by not going absolutely straight arm lifts.

sitting about 95kg birds was 98 but sickness knocked me around and looking a bit sloppy and strength has gone down a bit. Few things contributing to that though.

I never try 1RM when im fresh like i should though.

I have shit flexabilty in shoulders to from the recon. Have to have a pretty narrow grip for bench.

I only lifted that weight because i was training with someone else. Usually wouldnt go over 100kg bench prefer to get more reps out.

But after i try have a bit of a break might change things up a bit.

My sessions take between 1/2 to 1 hour, I work about 200 meters from the gym so it would kill kittens if I didn't go, plus by the time I get home the minister of war and finances will have dinner ready for me (if I'm good), as for recovery I only train 1 muscle group hard once a week (except for the bicepticons which I am hitting twice due to vanity) , so lots of time to recover, plus I eat 6 times a day, eat well and can eat/drink everything and have no idea what a macro is, is it a biscuit? I like biscuits....

I've cut away the 531 due to joint and cartilage problems ( there's not enough fish oil and glucosamine in the world) and am now again rolling with the GVT method which is much easier on the body parts and a good cardio hit to boot due to strict rest periods, 10 x 10 sets = 90 sec, 3 x 15 fluff sets = 60 sec.

1. Bench 10 x 10, 1 Arm Row 10 x 10, Inc Fly 3 x 15, Seated Row 3 x 15.

2. Weighted Dips 10 x 10, Bar Curl 10 x 10, Rope Tri Ext 3 x 15, 1 Arm Kettle Bell Swings 3 x 15.

3. Power Cleans 7 sets of 5 reps.

4. Mil Press 10 x 10, Pull Down 10 x 10, Lat Raise 3 x 15, Push Down 3 x 15.

5. Front Squat 10 x 10, RDL 10 x 10, GHR 3 x 15, BB Curl 3 x 15.

With 2 morning conditioning sessions thrown in there somewhere.

I use the same weight for all exercises, increasing if I make all the reps, the cleans are 40-45-55-60-70-75-80 % of my 1 RM of 90kg, again increasing by 2.5 kg if I get all 5 on the 7th set, Cleans get a 3 min rest between sets because they break my balls.

I also throw in farmers walks in sometimes on the Clean days as the Cleans only take about 30 minutes.

I still need to get some 0.75 plates as the 1.25 plates are getting heavier on some of the movements and a smaller increase would be better IMO..

P.S Running can now kiss my arse.

  • Like 1

I have 250gm and 500gm plates - the 500gm plates got me my 126kg on bench - hoping they can get me 127 next session.

The higher the weight gets the smaller those increments need to be! Even though the higher the weight gets, the smaller the proportion becomes for a static increase. Working with percentages is certainly interesting and puts it in good perspective.

Seems i have agrevated my left elbow. A tiny bit lower from the point and ive got a bit of pain. Nothing serious but its noticeable and uncomfortable.

Tennis elbow i am thinking. Not to sure how to help it

Seems i have agrevated my left elbow. A tiny bit lower from the point and ive got a bit of pain. Nothing serious but its noticeable and uncomfortable.

Tennis elbow i am thinking. Not to sure how to help it

Cut out angry masturbation ;)

On a serious note go see a professional or if you are sure its tennis elbow you can buy straps for them at the chemist cheap as.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...