Jump to content
SAU Community

Recommended Posts

Hi guys, new member here and new to the Nissan scene (I'm a Toyota guy mostly) so go easy on me. :blink:

I recently purchased a Toyota Century V12 engine and I'm currently looking for something to put it in. After much thought an R32 GTSt is at the top of the list for a number of reasons, not least of which is the fact they're incredibly cheap now plus there's a broad range of suspension/brake/whatever upgrades available for them.

No doubt over the coming months I'll have lots of questions, but for now I'm wondering if anyone has heard of a similar project? A brief Google search turned up that R34 with a quad-turbo Mercedes V12 (looks cool but way more coin than I'd be willing to spend), are there any other V12 Skylines?

For anyone who's interested, the engine I have is designated 1GZ-FE and is fitted to the 1998-current Toyota Century. It's a 5.0-litre 60-degree V12, all alloy construction, DOHC 48-valve VVTi, and officially rated at 280ps although I have a feeling the true output is a good deal higher. I happen to own one of these cars and it ran 15.9 @ 90mph at Willowbank raceway; not bad for a bone stock 2000+ kg luxo barge.

Info on the Century here:

http://en.wikipedia.org/wiki/Toyota_Century

Info on the 1GZ here:

http://en.wikipedia.org/wiki/Toyota_GZ_engine

And here's some detail on one of my previous projects (2JZ into early Supra), just so you know I'm not a n00b who's never done an engine conversion before:

http://www.norbie.net/Project2JZ/

Thanks guys, I look forward to hearing any comments or opinions. :ninja:

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/
Share on other sites

Nope not heard of a V12, had a mate that looked at putting a v8 in a GTR but it didn't fit.

With a V12 pumping out some serious torque and power, maybe you should look at a GTR shell and running gear. Use 4 wheels to get the power down. Some of the modded GTS-T's have big troubles getting the power down, but with a V12???

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3571865
Share on other sites

Top Secret has a V12 1GZ-FE powered Supra with turbos and the works.

It'll be interesting, but pretty hard work. Easier to do an LS1 swap into an R32 for big numbers, there's a couple running around.

There's also this beast:

735u6828.jpg

using one of these:

nissanskylinegtrv12moteur.jpg

a Mercedes Benz 600 S Class engine which has been Quad Turbo'd

Configuration : V 12 cylinders

Capacity : 6715 cc (89 x 90 mm)

Valve actuation : 4 over head camshafts, 48 valves

Forced induction : 4 turbochargers

Max. power : 1000 horsepower

Max. torque : Over 100 kgm

Clutch : Multiplate

Gearbox : 6 speed sequential

Chassis : Multipoint rollcage welded to the shell

Suspensions : Double whishbones, KW adjustable shocks

Brakes : 381 mm discs (front) 355 mm (rear)

Wheels : 13 x 18 magnesium

Tires : 345/35-18

Length : 1910 mm

Width : 1910 mm

Height : 1215 mm

Weight : 1000 Kg

0 to 60 mph : 3 seconds

Quarter mile : 9 seconds

Top speed : 220 mph

http://skylinev12.neufblog.com/skylinev12/

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3571873
Share on other sites

I'm aware I could get the same or better results with other engines, but that's not what this is about; I already have the engine, it just needs a new home. R32 makes sense for a number of reasons. :P

Transmission will be a Tremec TKO600, it's about the only manual transmission that will reliably hold the torque once I strap on a turbo or two. AWD would be nice but way more stuffing around than I'm willing to deal with. This won't be a drag car so 2WD will suffice.

Yes I know it will be a lot of hard work, I've done enough engine conversions to know what I'm in for here! Realistically though it won't be very different to any other non-RB engine swap; an LS1 for example would only have the advantage of leaving me a bit more room to play with, but actually fitting the engine/transmission would be the same amount of work.

Anyway it's kind of good to know there aren't any other V12 R32's, I like the idea of doing something unique. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3572410
Share on other sites

Norbie, you know its a good idea, do it >_<

I think it's a good idea too! My Century did 260rwhp on a dyno with an auto transmission and the world's most restrictive exhaust system (4 cats and SEVEN mufflers!) so even without forced induction it should make for a reasonably quick car. With a decent exhaust, manual transmission and a good tune it should be closer to 300rwhp. What does a stock GTSt weigh?

Also just to confirm, can anyone tell me what sump layout the RB20 uses? I've been told it's a front sump setup but I need to be certain of this before I make a move; the 1GZ is front sump and changing it would be quite difficult.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3573409
Share on other sites

~1260-1300kg depending on what year and who you talk to and yes, front sump.. good luck! sounds interesting ;)

Good times! My Supra weighs about the same and ran 12.49 @ 117mph with a bit over 300rwhp. If I could manage similar performance without forced induction I'd be pretty happy.

Is there a "top 10" list of NA Skylines somewhere around here? No doubt there's an LS1 monster which has already well surpassed those numbers by now, but it would be interesting to see all the same.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3573894
Share on other sites

  • 3 weeks later...
norbie you've defected from SF, your a double agent now lol?

from memory the fastest NA was some who used a VH45 and ran 12's while NA, then nitrous got him 11's, then 10's superchaged+NOS

I'm slowly infiltrating all car forums in the country. :)

12's should be pretty easy to beat with extra litres and cylinders.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3606689
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
    • There is an ABS pump and a few solenoids. You could trigger the front/rear solenoids with a pressure bleeder attached with a Consult 2. 
×
×
  • Create New...