Jump to content
SAU Community

Recommended Posts

Hi Guys,

Has anyone used Tein super streets in there skyline? What are they like?

Im thinking of getting some for my r32.

They are going for $1505 from http://www.nengun.com/tein/super-street this is the best price ive seen so far, has anyone delt with this Nengun before???

Ill be driving on road prob 70% of the time, and 30% track. And these sounded pretty good to suit my needs.....

Cheers

Ant.

Link to comment
https://www.sau.com.au/forums/topic/201226-tein-super-street-coilovers/
Share on other sites

Price up some from Slide on these forums, he sells them for a good price, but yeah Nengun is good to deal with.

I've been in a 180sx with some Tein Super Streets and was very impressed with the handling and overall feel of the suspension. I'm thinking of swapping my suspension for some Tein Super Streets some time this year.

http://www.skylinesaustralia.com/forums/Te...op-t193401.html

He does not stock them for R32. Still will have to be ordered. I would also try getting a price down at your local Repco as i know they can order them in and you might not have to go through the what can be a horror of Nengun.

I use the Super Street's in my R32, I have had them in now for about 18 months and havent had an issue, they're perfect for ride comfort (my car is a daily driver) as long as you dial the stiffness down a bit, but they give really good response and handling too.

I have used them for track events aswell and as long as you dial up the stiffness they're really good, they're not the best track suspension but they are meant to be used on the street aswell so they're a great compromise.

I cant fault them. :)

  • 2 months later...

I'm also looking at getting a set to replace my Zeals.

Driving down Parramatta Road is punishment.

Anyone else had experience with them? Any one in Sydney with them willing to take me for a ride? :thumbsup:

Edited by Scandrew

http://www.skylinesaustralia.com/forums/Ja...ie-t207661.html

This is the thread I started not long ago! You really should search. Anyways, check it out! I am going to put my experience on there vary soon but to summerise = Jap spec are unbelievable! On full soft it is just a bit firmer than stock but not floaty at all. all the way to very hard and it handles like a go kart but you'll get sore after a while!

P.S. Never buy tiens for an R32 from slide! 4 failed delivery dates, impossible to get hold of and will not ever get back to you, very poor service when you finally do get hold of them. I did finally get them but a couple of very frustrating weeks late

I got my R34 Tein SS from Henry (RMS Motorsport) and I had no problems with it, good communication and advices.

As soon as the item arrived in Aus, Henry sent it to me from Melbourne to Adelaide on the same day and I get it on the next day. Woot woot.

Edited by hulk

I've driven both on the street-

Bilsteins-

Clearly a better ride on the street

Would be my choice for someone wanting great handling on Australian roads

Legal

Tiens-

Jap spec= illegal (aus spec might be ok though, not 100% sure)

Felt cheaper in the handling

Not over the top spring rates

Pillow tops squeek like a bitch (optional)

Cheap

Large height adjustment for someone wanting looks over handling

So obviously i prefered Bilsteins but thats not to say they are right for everyone.

Have aussie spec Tein SS on my 32 gtr. Drives beautiful on the street, not harsh/bumpy yet still firm enough. Did a track day and a little stiffer would have been better. Suspension place that did all the work set em up with a 'medium' setting for the street. No complaints so far

good info here - i too am trying to decide between coil overs and the sk groupbuy (but not the coilover option $++) with a preference for track ability at the expense of a little street comfort.

I'm also looking at getting a set to replace my Zeals.

Driving down Parramatta Road is punishment.

Anyone else had experience with them? Any one in Sydney with them willing to take me for a ride? :D

I found Liverpool road worse. :)

Possibley the worst road in NSW/Australia.

i thought they were a great street setup, firm yet comfortable with heaps of dampner and height adjustment. And for price, i couldnt ask for anything else

i've got a set of tein super streets for a r33 for sale (thought i would stick that in there lol), like new less than 5000km old if anyone is keen

Edited by R34GTFOUR
I've driven both on the street-

Bilsteins-

Clearly a better ride on the street

Would be my choice for someone wanting great handling on Australian roads

Legal

Tiens-

Jap spec= illegal (aus spec might be ok though, not 100% sure)

Felt cheaper in the handling

Not over the top spring rates

Pillow tops squeek like a bitch (optional)

Cheap

Large height adjustment for someone wanting looks over handling

So obviously i prefered Bilsteins but thats not to say they are right for everyone.

Care to clarify the legalm / illegal points? Doesn't sound right to me

What and Bilsteins are ADR? Actually, im going to shoot from the hip and say its all BS!!!!!!!!! So if you have a VR Commodore with worn shocks and you run down to Repco nad buy some Monroe Sensatrac etc for your car..... are they illegal?

I would love to know the supposed ADR which shocks are meant to comply with??????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...