Jump to content
SAU Community

Rb26 With 2.8lt Stroker Kit, Cam And Headwork. Turbo Choices

skylinekid

By skylinekid,
in Engines & Forced Induction

 Share

Recommended Posts

Risking Grand Master

Risking

Posted
Posted (edited)

You posted this on the 10th of jan

hey everyone i have a couple of questions i have a r33 gtst which i will be puting a to4z onto very soon i already have internals etc etc... im just unsure of wat sorta fuel system i need to install.... i wish to make 500-550. suggestions on size of surge tank size of fuel lines wat lift pump from tank wat pump afta surge wat fuel rail to suite greddy plenum.... wat injectors.... ne help is much appreciated thnx for ur time

Had you not already decided on the T04z??

Its probably the best turbo for your goal if you are still considering a big single.

This was posted yesterday

r33 gtst. in process of building motor have got three options.... rb25 block gtr crank h beam eagle rods je pistons fully built head...

rb26 transplant same as listed for rb25 but with the flow characteristics of a 26 head with cams and so forth.

or a 26/30 built bottom head with cams blah blah you catch my drift i just cant make up my mind and i cant find ne decent machinist that dont want my left nut for making the 26/30 combo or doing machine work i was for both rb25 /26 engines

This was the 11th of jan

im putting a gtr crank into my gtst block but im unsure if the twin plate from my gtst will bolt upto the back of the gtr crank does neone know if the holes line up from gtst to gtr

Hang up a second. You didnt wanna pay a machinist to do you a 26/30 but you bought a tomei stroker today when yesterday you had 3 engine options about what you were thinking about building???

Says in that first post you have built internals etc etc??

I dunno bout anyone else but im sure as shit confused about pretty much everything you've said???

Care to clarify exactly what you do and dont have, im not being derogative towards you but mate tell us what you do actually have truthfully and we can give you honest and experianced advise

Edited by Risking
Piggaz Grand Master

Piggaz

Posted
Posted

I have the tomei stroker hidden in a GT block.

Turbo's are HKS GT RS's with Tomei Procams 270 @ 10.25mm with a ported head.

Fullboost (1.65 bar) @ 4800 RPM in 4th (give or take 100 RPM)

Wouldnt change a thing. At times i wish i had maybe 2530's but it really isnt that bad.

a20089 Veteran

a20089

Posted
Posted
lol now its a 2.8 HKS kit.

Now, the most important question... skylinekid... are you 15?

And before you bag someone maybe you should read who you are replying to. Skylinekid didn't say he had a HKS. :P

tm_r33 Experienced

tm_r33

Posted
Posted
im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

+1

yes i am also very confused as to what exactly he wants advice on.. which one of his 3 motors lol.

skylinekid Proficient

skylinekid

Posted
  • Author
Posted (edited)
sometimes u just cant help retards :P

hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

Edited by skylinekid
skylinekid Proficient

skylinekid

Posted
  • Author
Posted (edited)
im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

ebay top bloke

even got the ones to run bigger lift

Edited by skylinekid
skylinekid Proficient

skylinekid

Posted
  • Author
Posted
can you provide the ebay link for your purchase?

http://cgi.ebay.com.au/Tomei-Stroker-Kit-N...1QQcmdZViewItem

i havent fully ordered it yet ive email'd him to make sure its the right kit but yeh i just wanna make sure

im pretty sure its the non cooling channel kit tho

shanef Grand Master

shanef

Posted
Posted
hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

skylinekid Proficient

skylinekid

Posted
  • Author
Posted
shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

well for one read b4 u post.... i want 550 to 600 rwhp

is it still overkill

NXTIME Grand Master

NXTIME

Posted
Posted

What size cams and what headwork are you 'planning'?

That Tomei stroker kit is only the 8 counter kit and the 'cooling channel kit' is actually only an extra option regarding pistons. Everthing else is the same.

Do you actully need a stroker? Plenty of guys are running rb26's with TO4Z's and are making the required power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      Borg Warner EFR Series Turbo's V 2.0

      By niZmO_Man · Posted

      Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
×
×
  • Create New...