Jump to content
SAU Community

Crank For Rb30de/tt

nsmo30tt

By nsmo30tt,
in Engines & Forced Induction

 Share

Recommended Posts

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

what can you spin the standard rb25det oil pump to on a rb30det? is 7000 too much ? or is that a safe limit ?

& LOL at this guy.

I have a suggestion, if you have that much money (which you probly dont and your just wasting our time) please go to the LS1 forums, those guys there will show you how to build a commodore with 2 x 2000hp turbos because they have done it before.

Your mates will think your hectic.

If you ARE serious, your going to have to buy one of those $30,000 OS 3 litre kits from japan. Thats what i would do.

ohhh i would kill to see such a powerfull RB at summernats wasting away the 6 litres.

but anyway il stop dreaming now, as you should mr rb30de

N1GTR Grand Master

N1GTR

Posted
Posted
my rb26/30 has a standard rb30 crankshaft with built up oil pump drive to suit jun pump then nitrided has seen low 9sec ets and over 1000rwhp on dyno

What work did you do to the block? (if any)

bubba Grand Master

bubba

Posted
Posted
ok let me say this again.... I said atleast 800 which means 800+ ok so if you really don't have anything helpful to say please just don't waste your time or mine.. I'm here to ask questions not to read what you think of me

Mate use the search facility and read the abundance of information available on this wonderful forum. You were going on like what you wanted was equivalent to flying to the moon yet someone has done it.

Most people are happy to answer questions but usually when they're specific, not to facilitate pipe dreams.

nsmo30tt Enthusiast

nsmo30tt

Posted
  • Author
Posted (edited)

well yes i have searched the forums.. the main thing i want to know is rb26 or 26/30 what is more powerful and these questions are sort of sorting out the pros and cons along with what I've been reading. Theres plenty of powerful 26's but I have not yet seen a highly modded 25/30 26/30 and before i start spending big money i just want to know when im done at the end of the day ..what will be able to put out the most power

Edited by rb30de
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
well yes i have searched the forums.. the main thing i want to know is rb26 or 26/30 what is more powerful and these questions are sort of sorting out the pros and cons along with what I've been reading. Theres plenty of powerful 26's but I have not yet seen a highly modded 25/30 26/30 and before i start spending big money i just want to know when im done at the end of the day ..what will be able to put out the most power

My friend... Forced Induction 101

The motor with the biggest turbo, will make the most power.

Or in your case, two 2000hp turbos...

Do a search. Its at that point now mate.

Questions like "what is more powerful" wont go anywhere.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...