Jump to content
SAU Community

Recommended Posts

good thread

hijack sorry, where did you guys source your hks gtrs's from. i'm in sydney and need to purchase one asap. was hoping to get the complete kit for under $2600, am i dreaming?. i know nengun do it for $2550 but that's waiting up to a month >_<

I got mine through nengun, only took 2.5 weeks to get here so i was lucky.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

See attached link of .64 2871R on stock bottom SR20 with 400whp. OK so its a 56 trim and it was on a dynojet with extrude honed stock exhaust manifold and exhaust housing.

http://forums.freshalloy.com/showthread.ph...ight=JWT+S3%27s

Ah your in the US. Those dyno jet things read up a bit on what we see here.

Which is right? Who knows, only used for comparo anyhow... but yeah.

Its a bit higher than what we 'see' here on our brands so that evens out with everyone else's results (in aust) of around 270-280rwkw at a peak.

Good result either way.

Ignition DVD volume 1 i think it was. Gold R33 GTST with a HKS GTRS kit,

I knew you'd say that car hehe. Its the only one thats produced the mystical number >_<

I dont think VCT poses a power restricton.

warlords graph would be the pick hands down either way. That stonking power early would make it very tidy to drive

The cam option will cost you $1000 no more to pay.

The nos option will probably cost close to that (installed and tuned) plus how much for refills, and as life dictates, it will be empty when ever you really want to use it >_<

Can you send me that link as well, would like to have a look.

pm sent ....nos is $2000 tuned fitted ,refilled and supplied with 75hp pr 56kw

Edited by WARLORD
I knew you'd say that car hehe. Its the only one thats produced the mystical number :D

I dont think VCT poses a power restricton.

warlords graph would be the pick hands down either way. That stonking power early would make it very tidy to drive

Ahhh so you knew about a 300kw GTRS equipped car, trying to hold back the truth ay >_<

But yeah i know what you mean, above something like 270kw its a mission to get the numbers out of it but i still think with a bit of mucking around it isn't as hard as it seems, ill try to continue this magical test of 300 out of the GTRS :D

Yeah im really impressed by warlords graph, if i had that power i would be very happy indeed.

Ah your in the US. Those dyno jet things read up a bit on what we see here.

Which is right? Who knows, only used for comparo anyhow... but yeah.

Its a bit higher than what we 'see' here on our brands so that evens out with everyone else's results (in aust) of around 270-280rwkw at a peak.

Good result either way.

Actually, I'm in Perth WA but frequent the US forums for info. Yeah dyojets probably read 10 - 15% higher than our Dynamics. That said I've also seen by brothers SS Commodore car read 500 rwhp on a dynamics in Sydney and 450 back here in Perth. So obviously calibration differences btw dyno's of the same ilk.

  • 2 weeks later...
The results will be much the same as the HKS item mate.

Might be a minor variation, but for all intents and purposes its near enough

so why is it that everyone calls it the same thing, yet everyone i talk to says the 2871r will only put out roughly 240rwkw, yet the gt-rs is able to pull >270rwkw. i've searched and searched, sent PM's but i still don't get it :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
    • Been a busy but productive day. Axle and hubs acquired. All fitted up after a bit of modifying. Need to sort out wider mudguards and running light reflector covers but other than that the trailer is gooood to go !!
    • Selling a SMIC for a Nissan Stagea C34 Series 2 and the pipe from the intercooler to inlet. (I believe it is the same R34 GTT, please correct me if I'm wrong) Price: $50? I dont have a photo of the big black pipe that goes from SMIC outlet to throttle body.
    • So the original radiator is leaking now. Looking at getting a fully aluminium one next. Am I correct in saying that the Series 2 Auto Stageas have a separate trans cooler from factory (located in between the rad and intercooler in my previous post/message).   Currently looking at Fenix $460, Blitz $700, GReddy $800, and KoyoRad $740. What are everyones thought on Fenix ( ive read a few comments saying theyre cheap Chinese rebrands etc and how their build quality is... well.. chinese...)  compared to the others? Worth the extra couple hundies?
×
×
  • Create New...