Jump to content
SAU Community

Recommended Posts

About $80 mate.

Roj

thats not bad at all, thats $80 for just the handle ye?

I saw you mentioned $80 for handbrake in a previous post, im guessing thats the handbrake boot itself?

Can i drop off my car and he removes and retrim the handle?

Or do i have to remove it etc.

Will he do a small job ie. just the handle?

cheers ;)

Yeah that looks nice and new. Mine looks like crap but i got the handbreak boot sitting here from where i got my fake leather seat covers so i should put it on but im a bit clueless on how lol

if you're referring to the handbrake boot install;

just unscrew the screws on the side of the centre console and pull it up.

Sounds simple enough ill try it tomorrow or the day after.. having problems with my fkn intercooling piping i cant even let it hit boost the pipes are falling out coz i got shit clamps so i bought new ones from autobarn which the guy came and measured to get me the right ones and totally screwed them they're all way bigger then i should have and i have to wait 1 week just to get the smaller ones!

thats not bad at all, thats $80 for just the handle ye?

I saw you mentioned $80 for handbrake in a previous post, im guessing thats the handbrake boot itself?

Can i drop off my car and he removes and retrim the handle?

Or do i have to remove it etc.

Will he do a small job ie. just the handle?

cheers :(

Hey Rekin,

The hand brake handle only, recover = $80

The boots for Gear shift and hand break were about $300 from memory.

Yeah if you can get if off and drop it in Im sure he wont mind, I dropped off my whole car and was ready within a day.

Just give him a call if you have any questions.

Roj

As others have said I got my steering wheel, handbrake and gear stick leather replaced in my old gtst by Gary Blackman. He did an awesome job and would take any of my retrimming there. Mine was done in alacantra leather for grip but he has every option available.

post-6243-1201552897_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...