Jump to content
SAU Community

Recommended Posts

I had the white illuminous guage kit put into my R33, after pulling the dash in the last month or so found that the lights were missing completely... might try to get them back off the auto electrician.. if so i wont need all of them!!!

will post here if i get them back!!!

Link to comment
https://www.sau.com.au/forums/topic/20381-clock-globes/
Share on other sites

Dont know about R32 clock globes but I have put in new dash heater control globes on my R33.

Nissan I am told $30 each

So hunted around and found some with out the blue condom and they made the dash look yellow, not good, I carefully removed the blue condom off the old globe and put it on the new globe but it was not strong enough to light the dash, so back to hunting.

they do not say what wattage they are so I got a good blobe and measured its resistance (+ - 18 ohms) and found a pirate bulb $4 works a treat. had found globes with wires out the base and put them into the plastic mount but they weren't bright enough either and $9. they are about 4mm in diameter.

The drivers door Auto window switch also has a globe, about 3 mm diameter, I think for that one I found a globe with the wires out the base of it.

hope thet helps and gives u hope

Link to comment
https://www.sau.com.au/forums/topic/20381-clock-globes/#findComment-452725
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...