Jump to content
SAU Community

Recommended Posts

Thanks for all the replies! Where to start...guess i started learning about imports and engines through my boyfriends and their mates. I picked things up quickly and just found that when it came to digging into an engine i was always up for getting my hands dirty. The passion manifested from there started learning more and more about how everything works with engines and turbos and how the differences between various engines produced more or less power. I'm actually a nursing student in S.A. lol and alot of people were surprised when i came out of the closet (so to speak) and bought my baby. So cheers again and heres some pics.

post-47417-1202443935_thumb.jpg

post-47417-1202444004_thumb.jpg

post-47417-1202444075_thumb.jpg

heya cass welcome! thats a pretty full on BNR32 u got there... kinda makes mine look..... weak.... baahahaha

what is it with you guys and ladies joining the forum... first question is always pics!

ull find us a bunch with alot of knowledge in every department and always happy to help... just avoid the forum during school holidays.. u'll find out why!! puts us to shame!!

all the best for u and your stunning new Bnr32 aka godzilla

also... mods and dyno results??

peace

mark

Edited by jenkies

wow that bonnet is a pretty nice design. do you know where the previous owner got it (I'm assuming they put it on) or what model it is if you don't mind me asking?

car's hawt. good buy.

Welcome welcome!!

Nice to see more girls in GTR's!

I'm a 22 year old chick as well and have an R34 GTR :thumbsup: We should start a GoddessZilla Club hehe

Best wishes!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...