Jump to content
SAU Community

Who Is Coming To Drive Watch Drift This Weekend?


Recommended Posts

Just wondering who is going to drive/spectate at the drift this saturday at calder park?

This is the First open practice event this year on a weekend or in the daytime for that matter, which makes for good photo opertunities, and there may not be another one. Due to the high price of track hire.

The experienced drivers will be driving the track backwards! for one section entering blind over the hill into the shicane on the back straight is really scary! The best drivers kicking it oposite scando styles before the even get to the hill then exchanging over the rise!!not to mention great to watch as cars slide out of the last corner on the long track and skim the wall as they jam third and hit limiter all the way up the straight. :no:

The Holfrods S14 and JDS Imports LS1 s13 will be testing their cars for the DA series......and i hear Chris Dejager will have his new car there as well.

Should be a great day of thrashing!

Hope to see you all there.

Cheers Warwick

Vicdrift event manager

ok, pulled this from the website. doesnt mention anything about saturday though..

Drift practice

High powered performance street cars, high precision driving, Calder Park is now drifting nearly every last Wednesday of the month.

Fans, whether you want to spectate or compete, make sure that you're there to enjoy and join in on all the spectacular side by side, triple and quad action!- Drifting at Calder Park!

Gates Open: 5:00pm

Racing: 6:00pm through to 10:00 (entries & weather permitting)

Entry Prices

Competitors: $90

Spectators: $15

For further event information, contact reception on 03 9091 0800 or at [email protected]

Who can compete?

Anyone can compete. You do not have to have a highly modified car to drift. Unlike most forms of motorsport, it is not about times or track position, it is about finesse, style and car control.

Drifting is judged by officials who follow a set of rules and regulations and therefore purely relies on the driver’s skill.

FLAGS

Yellow Flag:

Will be waved or shown to warn drivers of a hazard ahead or in the area of that yellow flag, there is not to be any DRIFTING/SLIDING or OVERTAKING on the next corner after the yellow flag was shown.

Red Flag/Flashing Red Lights:

Drivers must stop immediately where they are on the track and await further instructions from an official.

Black Flag:

Driver to leave circuit and report to the meeting director.

Edited by jake33

ok called them up and this is what they stated:

vicdrift

basically guys/girls learning how to drift

9am till 4pm

spectators welcome unsure of price but i would imaging $15 - $20 or so..

Edited by jake33

i'll put the vicdrift calander up in the events section

so you guys can check out our next events.......sorry i didn't get back with details, i was clerck of corse today and was busy preparing for the event.

The gate open at 8:00am at all our track days and shut at 5pm. for future reference.

$20 to spectate at our events too.

cheers, hope some of you can make it to our events.

Warwick

vicdrift event manager

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...