Jump to content
SAU Community

Calder Park Drag Night

cheez

By cheez,
in Archived Events

 Share

Recommended Posts

cheez Mentor

cheez

Posted
  • Author
Posted

$25. thtas the spectator fee last time i went.

unfortunatly i might not be able to make it down, will depend on work now. if i can get out of it ill be down for sure but will confirm everything on thursay.

Tours Rising Star

Tours

Posted
Posted

Realy wanted to come down for another run and see if i can break into the 12s....

But uni has conveniently decided to put a compulsory lecture from 5:30 - 8:30 on a Friday night...

Worst time possible.... YEP.

Will be heading down another Friday in a few weeks, cant miss the first lecture.

Tours.

cheez Mentor

cheez

Posted
  • Author
Posted

hey guys, im not going to be able to make it 2nyt, work has just infrmed me that im gonna be needed til about 8pm, you guys are more than welcome to still go down and have a drag there, weathr will be good, and im sure if i can ill organise another nyt and piss work off for the day.

sorry again

Curmi Grand Master

Curmi

Posted
Posted (edited)
If i wanted to just come to watch how much does it cost to get in? does anyone know??

let me know thanks

Peace

$15 general admin then $10 more to park inside (just park outside) save 10 bucks

Edited by r32 drift4
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...