Jump to content
SAU Community

Recommended Posts

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :cheers: WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

Edited by HaZ3inSKY
Link to comment
https://www.sau.com.au/forums/topic/205297-battery-problems-please-help/
Share on other sites

1) speak better english.

2) if you have let a lead-acid battery stay in a discharged (flat) state for more than a few hours it has sulfated and will never hold a charge again.

Replace your battery. Three days of being flat means the battery is stuffed.

/thread

please get an omnimeter and measure the voltage directly from your battery terminals and post that first.

it does sound like a sulphated battery, but it could also be a corroded or degraded wire where they connect to the connectors onto the battery, since the factory don't solder the connections, they just clamp them.

get the battery shop to run some tests on your alternator and battery function.

If the battery is bad and you measure the voltage while the alternator is running and the voltage is up aqround 14V instead of 13.5V it indicates your battery needs replacing.

Battery conditioner will usually fix a reasonably new battery

If your car is not going flat after starting it a few times or your lights etc. dont dim as you increase the load on the circuit then its not your alternator i.e. regulator, brushes, windings etc. 14v is within the normal op range I thought?

There may be a current drain coming from somewhere else which will require you to look around the car with a multimeter to find the short. Not sure why you would measure voltage with an ohmeter (only measures resistance) unless you mean a multimeter which does the lot.

That click is the horn relay. If your horn isnt working it may be associated with that. Check to make sure the horn is actually plugged in and that the correct size fuse is being used. If its already plugged in, un plug it (tape the wires so dont touch car) and see if it happens again...

Edited by Jmaac

Thanks I was looking for the word "multimeter" could only think of "omnimeter" meaning meters everything: I was not reffering to "ohmmeter". Guess I could have used voltmeter.

HaZ3inSKY if you want help please get that reading direct from the battery terminals with the car switched off.

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :) WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

check for poor earth or an earth leak. Had one on my boat and used my 2week old battery as a sinker cause it would not hold charge after that

You pretty much got your answer @ post 2

Unless it was a deep-cycle battery it's probably cactus, could try getting a little more life out of it with some battery conditioner to de-sulphate the lead plates, but generally it will never be the same as a new one.

  • 3 weeks later...

I had the same problem a while back when my sister borrowed my car for a day to work. When she came back, she didn't switch off the fog light. After 2-days i wanted to drive the car and when i put the key into the ignition barrel and turned, nothing happened. Not even a clicking sound. Saw the fog light switch still on so i decided to jumper the car with my mum's corolla. Took a while too. Crank it like 4times before it will start. Took it for a spin on the highway for an hour and the battery was fully charged. Reads 14v on my Blitz FATT.

Another note, my friend's car will never start after he parks it overnight. Reason is that the charging light comes on eveytime he switched the engine off hence battery power is draining when the car has no power. It was a faulty alternator in the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...