Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...
  • 3 weeks later...

news...

well the guys at hills went to the effort of putting developing a plug in loom extension to swap the pins required for the late s1 stageas. What they didn't get sorted out is some sort of difference between the 34 gtt and late stagea coils which caused the #6 ignition chip to burn out after about 30 min. PFC is off for repairs, then a firmware upgrade to sort that, then we will be back in business. 2-3 weeks probably.

this has been a real saga. I recommend aganist buying a late s1 stagea if you are thinking about modifying it - stick to the early model where everything works ok

  • 2 months later...

bloody hell this thread went on too long!

anyway, I've got the car back with the PFC in and all running beautifully. a hell of a lot of work went into getting it working. the good news is I didn't really pay for the development (just a tune) but that means I can't really share the wiring changes (except to say there are a lot). Mark @ Hills Motorsport finally worked through it all and has developed a piggy back loom so the standard wiring doesn't require modification. Anyone with 9/97-8/98 stagea really should talk to him to get it sorted.

The standard auto ECU was working very poorly with the manual conversion (looks like this is another late series ECU surprise). The late ECUs put heaps of timing in over 4000 when it doesn't get a signal from the ECU (45o at 4500!!) which turned out to be the cause of my pinging problem....I had changed the fuel pump, FPR, air flow meter trying to chase that problem. It also runs very very rich (up to 9.5:1) and to add insult to injury the closed loop (02 sensors) turn off over 2800rpm and 1/4 throttle, no wonder fuel economy was woeful.....PFC has sorted it all out perfectly.

I will work out how to overlay the original dyno graph (130rwkw) with the new one, they are a very interesting comparison

Its now making 175awkw at 13psi....which made the clutch slip so boost is back down to 11psi (155awkw). but most importantly the mid range is very strong, and the initial throttle response 1000-1500rpm is noticeably sharper. top end really runs out of puff though.

mods are:

3" turbo back exhaust

11psi boost (greddy profec b)

manual conversion

r34 power fc with wiring changes

intercooler, injectors, turbo, intake etc are standard.

right now it will stay as is, its taken ages to get it sorted after the manual conversion, and now with the extra power, sydneykid's suspension, interior goodies it is very nice to drive and suits it's job very well (towing, moving the kids around and daily driver). I'm not looking to push it power-wise or anything, it just needed a bit more poke than it used to have.

if the opportunity comes up for the right price I will do:

front mount (it was really quite hot on the dyno even at 11 psi.) personally I don't think the 34 sidemount can make enough difference to be worthwhile, but I've never tested back to back

skyline cams and a cam gear

new clutch

highflow turbo

but I am certainly not in a rush.

not sure yet, I am running the first full tank now. welcome to the difficult ecu club btw.

tangles, I've run remaps for years in the race cars and am very happy with them as well. its just that there are some extra costs for the daughterboard/ecu mods in these cars, and they are a little harder to retune. But I think its a very viable option.

not sure yet, I am running the first full tank now. welcome to the difficult ecu club btw.

tangles, I've run remaps for years in the race cars and am very happy with them as well. its just that there are some extra costs for the daughterboard/ecu mods in these cars, and they are a little harder to retune. But I think its a very viable option.

nice, Im new to turbo's, and I definately suggest a Toshi remap in conjunction with a piggyback such as safc/sitc, emanage ultimate, haltech interceptor etc.

mod chip plate is a cple hundred, chip and tune is the same, plus soldering costs for the mod chip plate bracket holder

mark @ hills is also looking for someone with an auto that wants to run pfc. they have done a lot of work on running pfcs with the auto trans computer and need a stagea to get it sorted out

Got my car back today and it feels totally different!!! Here's the work I had done:

FMIC installed (finally!!!) - GReddy Spec R-HG return feed kit;

PowerFC installed and tuned (finally!!!);

X-Force split front/dump pipe;

X-Force high-flow catalytic converter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • He obviously had his reason for flipping you off. I wonder what it was...
    • Thats why I stay far, far away from Eastwood. only go there if I wanna eat Korean food 
    • I have to agree like, yesterday, I was driving down the warringah freeway towards the bridge when this jackass driving a beaten up Honda civic cut me off so suddenly it made me almost yank the wheel to avoid him hitting my car. Honestly and he had the NERVE to flip me off (or some other gesture Idk). Im a calm guy, but really some people just dont deserve to have a license, let alone be allowed to drive on densely populated roads/highways. If youre gonna cut through lanes at least use the damn turn signal
    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
×
×
  • Create New...