Jump to content
SAU Community

Recommended Posts

hi,

last night i was driving home from drift prac (was watching not drifting) and then my missus pointed out that my turbo timer was slowly creaping up in the time and i was just cruising along in 5th gear at about 100km. at one stage it got to about 4mins 30secs. this is the 1st time i have seen it do it and found it very strange.

then i went to a mates house and let the car cool down, then left to drop missus home and every time i boost it the timer goes up a little bit.

does anyone know whats the problem with that?

Cheers Shane

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/
Share on other sites

do you have a greddy timer?

if so, you can change it to P-1 or P-2 mode, and set it to whatever time you want to set it to.

Ideally i just set it for 10 seconds on normal street use

and keep it at 7-10 mins when on the track

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635589
Share on other sites

yea its the greddy timer, because i usually boost it as most do, i have never seen the time creep up before till last night.

i got it set on 30secs for normal driving

you need to hold the power, and the second button from the left together (i think) - until you get P-1 or P-2 showing on the screen - then set it for the desired time. If its on P-1 or P-2 it wont go past the set time (say 30 seconds).

shouldnt it be at least a min? how do you know how long it should be set for???

I put it at 10 seconds, cos usually in the last 5 mins before i get to my destination i make sure i granny the car in :D

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635629
Share on other sites

not sure man - but i think what most people do is they drive without hitting boost for the last few minutes before destination and that i hear is more than enough.....

it depends on the person.

I used to have mine for 1 minute before, but that i feel is not realy needed.

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635665
Share on other sites

If you drive the car normally then even if you have a turbo timer you dont need to use it...

Its only when you boost the car is when you need to cool down the turbo. Howwever most poeple (Me included) feel more comfortable using the turbo timer. In which case after normal driving 30 seconds is fine. 1 min and 20 seconds is far to long if you just been putting around. Shouldnt matter what turbo you are using...

And i think your Greddy turbo timer is moving up cause it has a setting which enables the turbo timer to determine how long your car should be cooled down depending on your REVS. My greddy does the same thing. But as was mentioned before putting it on P-1 or P-2 can let you set the amount of time.

I usually have P-1 set at 2 mins and P-2 set at 30 seconds. So depending on my driving ill choose between the two.

Hope this helps you out =)

Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3635957
Share on other sites

  • 2 weeks later...

That creeping is the auto timer feature in the unit.

i have it as well..

When your car is doing higher revs or there is a big load on the motor the time goes up. it judges it by the rpm.

I think this feature is better than setting it yourself.

mines set to min 20 seconds and will creep if i use the freeway or keep it at high revs the numbers go up.

my 2c

GOOGLE FOR THE MANUAL OR ASK SOMEONE ON HERE!!! there is so many other features on that turbo timer.

V guage, A/F n some others i think

Edited by lighty01
Link to comment
https://www.sau.com.au/forums/topic/205327-turbo-timer/#findComment-3682515
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...