Jump to content
SAU Community

Recommended Posts

Just looking for feedback on the quality of various fuels in canberra. I have had running problems with some fill-ups, and have so far found that kambah caltex (vortex gold) seems to be pretty good, and charnwood shell (optimax) has caused some running probs (mostly in mates cars). Any good or bad experiences??

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/
Share on other sites

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

As far as top quality 98 RON.... You can't go past BP ULTIMATE. Most of my mates use this as it is apparently the only constant 98 RON fuel. However, not all BP's in Canberra stock it. Some carry Premium Unleaded only, don't be fooled this isn't the same as ULTIMATE.

Shell OPTIMAX and BP ULTIMATE are the only 2 98 RON fuels. The others for example, Mobil SYNERGY or Caltex VORTEX, are only 96 RON - They are just Premium unleaded's.

98 RON's are what you should be using considering all japanese turbo cars are detuned to run on are crappy fuel. Although i think Premium unleaded fuels can be ok from time to time if you are really stuck. It also depends on car to car. ULTIMATE 98 is consitently good whilst OPTIMAX tends to go through bad batches sometimes (according to mates) but i've never had probs with either.

Hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-430772
Share on other sites

I only use BP 98...either from Kingston or Phillip...never had any probs, and I think the car runs better than on Optimax.

Terminal, Optimax is 98 :P ...someone might have been spinning a bit of you-know-what if they posted that it'd gone down to 96 i think! Unless they have insider info and we're all being bullshitted :D hehe

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-431609
Share on other sites

According to the Mobil website, Mobil 'SYNERGY' actually covers five types of fuel. Gas, Diesel, LRP, Unleaded and High Octane unleaded. The high octane is called SYNERGY 8000, and is the third type of 98 RON fuel available in Australia. Don't confuse this with the Mobil Premium (apparently not in the SYNERGY range), which is only 95 RON.

As you all may be aware, we live in the National Capital of Australia, which translates as the seat of Government.....only!. The PM doesn't even want to live here, why would oil companies be interested if us import junkies get decent fuel or not.

The nearest place that I know of that sells the SYNERGY 8000 is the MOBIL half way between Sydney and Mittagong. Maybe we should lobby MOBIL to provide 8000 in Canberra???

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-432777
Share on other sites

Originally posted by Terminal

This is where i got it from, i dunno if he's a fuel engineer or what...

http://www.skylinesaustralia.com/forums/sh...&threadid=20165

hehe no Carlo is not a fuel engineer, but he does seem to know what he's talking about. Maybe that's why ppl are starting to say that optimax is making their cars run like crap - if it only takes that amount of time for the octane rating to drop it can't be good ??

but regardless...they still advertise optimax as a 98 rated fuel..even if it drops by the time we get it in our tanks :D

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-435429
Share on other sites

I used Optimax when I first got the car but now am running BP Ultimate, I get more ks out of a tank even though a give it a bit more.

I have heard nothing but bad things about Optimax. There a few guys at work who had high performace cars, a heavily modded Silvia and an EvoII, and they both said there cars ping and run like crap with Optimax.

I forgot to mention that I asked the Caltex technician what RON the Vortex stuff is and he said it was 96 RON, what's the point?!

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-435877
Share on other sites

yep Phillip BP has Ultimate 98 for sure.

I have been told that Optimax is actually 96 RON with an additive to bring it up to 98. Apparently if you don't go through it quick enough the RON will drop back to 96.

Personaly I use Ultimate and Optimax, which ever servo is closer!

I might seriously make an effort to only use Ultimate and see how that goes.

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-441211
Share on other sites

people, people, people.....listen to me, I'm old and wise, and more importantly, I've done my research on petrols.

There are only three 98RON fuels available for street legal road going cars in Australia (with the exception of some independents in Sydney which is probably half ethanol anyway), they are.....

Mobil SYNERGY 8000

Shell Optimax

and

BP Ultimate

.....THAT'S IT....don't take everything you read as gospel...check it out. The internet is full of good information....if you check the right places....folks, check out the petroleum company websites.

Caltex (or Ampol) VORTEX is 95RON, but may be 96 in some outlets. Don't put this crap in your turbo import!

My advice is don't use crap fuel and a bottle of dodgy octane booster either...they foul your plugs. If you can't afford the good stuff, then maybe you can't afford the car!

The answer to timbar32's original question is.....if the Charnwood Shell is the nearest, go for the Optimax, or otherwise go to either Kingston or Phillip BP and get ULTIMATE (not premium, but ULTIMATE). I've used both Optimax and Ultimate, and have found no discernible difference at all!

just my advice, don't bite my head off

cheers Ozzy

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-453280
Share on other sites

  • 4 years later...

Hey guys,

You are correct, I've run back to back dyno sessions with Ultimate and Optimax about 3 years ago, and found we could lean on my old RB20 much harder on the BP feul. I'm not sure of what the difference was overall power wise - its wasn't like heaps - but it appeared that the quality of the BP feul was higher, and consistantly higher :D

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-3689977
Share on other sites

Fuels and my experience

ultimate = 98

"Vortex 98" = 98

Vortex = 95

Optimax or Vpower = 98

Vpower racing = 100 5% ethhol

"Synergy 8000" = 98

"Synergy 6000" = 95

"Synergy 2000" = 91

generic Preiums =95

Notes:

Mobil does not quote octane ratings on their web site

Optimax has not been sold for some time now

Caltex does not seem to even talk about their normal fuels

Yes fuel can go off in the tanks, this is not dependant on manufacturer. Some fuels may be more prone than others but I've yet to see any scientific evidence between different types.

Personal experience:

Ultimate provides me with 400 to 450km for 50 litres

V power provides me with 360 to 400km for 50 litres (still testing)

Vortex 98 provides me with 300 to 360 for 50 litres

Conclusion:

As most people have said BP ultimate seems to run better in Skylines.

Link to comment
https://www.sau.com.au/forums/topic/20539-good-fuel/#findComment-3690073
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...