Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

thats funny. you bought a $$ car from a shop and they didn't bother putting in $20 worth of new spark plugs? remind me to buy a car there sometime

and the same bloke reckons you can get less than factory boost using a boost controller eh? the laws of physics must be different on the north shore

Another note. Spoke to Tony from North Shore Prestige where I got the car from. He suggested a few things to increase economy.

- change plugs

- clean injectors (if they do need cleaning but unlikely he said)

- clean the afm

- get an ebc so you can wind down the boost to say 5 pounds when you dont need the power.

- dont drive with a heavy foot, which im not anyway.

Y get an ebc to wind it down to 5 when that is stock boost under 4 grand. I use a switching system so I can run stock and switch to about 81/2, if the gauge is accurate, when I need some hustle off the lights or hitting Henri Robert on the way back from the coast.

I think the system I built cost about $30 for the two switches.

Sure an ebc gives a whole lot more range, but if you have a std turbo why blow it.

The best mod I have for a virtual stocker is a 3" JJ dump, 3" X Force Hi Flow cat, and 3" cat back. I still have another muffler and a Japanese EPA canon that keeps the car super quiet but the 3" system lets it breathe a lot better and you can really feel it

I have a DFA ready to install. I've had it for two years. But every time I go back thru all the threads etc., even SK's epistles

I am still not entirely convinced that a DFA will signifficantly reduce my fuel consumption because it has absolutely NO CONTROL over my right foot.

Even at 151.9 for Ultimate today I am still happy with the thrill that driving at 16/100 gives me in a very safe vehicle that has a capital cost of 15 grand.

thats funny. you bought a $$ car from a shop and they didn't bother putting in $20 worth of new spark plugs? remind me to buy a car there sometime

and the same bloke reckons you can get less than factory boost using a boost controller eh? the laws of physics must be different on the north shore

ROFLCOPTER!

Why don't they just buy a Prius?? LOL

Just came back from a run from the ACT to Sydney and back over the weekend (only the 2nd time in 2 and a bit years). Only engine mods are 3" Split Dump, 3" all the way through a hi flow Cat, two pass through mufflers and a high flow air filter. Oh, plus my connection with the battery terminals failed the other day whilst travelling at 80k's an hour (completely dead, no power at ALL, engine off, a long downhill run ahead - another story) which nicely reset the ECU after I had just had it serviced. It just required a quick fix of the battery terminal.

We headed up the road towards Sydney on the saturday. I filled up at Sutton Forrest, stopped at Sutherland, next day through to the North Shore, back through Sutherland, up towards Picton, back on the Freeway towards Canberra and home (love those freeway on ramps ;-> ). Managed to make it all the way home to my local servo, where I filled up. It was on the Orange light for a while, and took exactly 60 Litres to top up. 520k's.

Very happy with that. Got to get the audio system replaced though, although the sweet sound of the turbo partly on boost at the occasional cruise at around 3,200k's was a beautiful thing. :D

I've been consistently getting 11L/100km drving to and from work, which is a 120km a day. I'm impressed with it, since the factory figures are around 12L/100km. not too bad for a 12 year old car with over 200,000km on the clock I think. 161c/L for Ultimate is starting to hurt though, hopefully someone buys the old girl in the next month or so so i can get myself a little 4 cylinder runabout to save some money on.

interesting, the last time i posted here i was getting around 14.5L/100km, but ive done a few tanks on vortex and synergy 8000, and im getting 13.5 or less L/ 100kms probably because im taking a different route and avoiding the traffic. getting up at 6am gets old though :P

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...