Jump to content
SAU Community

Recommended Posts

pretty sure it was matty 31 gave a wave got one back also seen a bayside blue r34 on main north road seen u wave but i was changing gears so i couldnt wave back ur car looked nice from what i saw :)

even had a commy pull up next to me and say nice car and he didnt drive like a tool after that dont see that every day lol

i seen a nice white s2 33 on Glynburn rd this arvo - first identity that came to mind after i seen it was ryanrb25 (very similar to the one in the sig/avatar) - although theres a few around this way with that VERY similar look (same rims etc). I was in a white bog-stock looking s1 33. :)

Saw a nice white 32 (GTR I think), pulled over on Anzac Highway near Cross Rd intersection around midnight with bonnet up and a distressed looking owner. Hopefully didn't collect a sticker.

yea me and that silver stagea pretty much cruised to victor on friday together, dont know him tho...

i also saw a yellow R34 at victor too.

That could have been me, Went to the crown for lunch with the family, Was it a silver M35 Stagea ??

i seen a nice white s2 33 on Glynburn rd this arvo - first identity that came to mind after i seen it was ryanrb25 (very similar to the one in the sig/avatar) - although theres a few around this way with that VERY similar look (same rims etc). I was in a white bog-stock looking s1 33. :rofl:

wasn't me mate, to the untrained eye they look the same :) thanks for thinking about me tho....means alot :P:D

Saw a nice white 32 (GTR I think), pulled over on Anzac Highway near Cross Rd intersection around midnight with bonnet up and a distressed looking owner. Hopefully didn't collect a sticker.

That mightve been the one I saw aswell, p plater? Not sure if it was gtr or not. Up the road was a black 33 parked, presuming it was with the white 32. Also saw a purple-blue 34 with a kit, rims etc going up north east road bout 12:30, chick driving.. very nice looking car!

Just before that, a black stagea 260 i think, turning at the interesection at the beginning of nth east road. Looked a bit like grims maybe?

LOL! its definitely those rims that make it hard to single out the white r33s Ryan, they are a nice pairing/look fkn tough on the car!

There is another one right around the corner of me with that same look also, but with a vertex looking kit all round. I love it.

Edited by Luciano_GTST

While parked in a little gravel opening on the side of greenhill road up in the hills, just before that right Mt. Lofty turnoff corner I spotted 5 R33's drive past, all looked to be GTSt's. All sounded very nice. Saw my car sitting there in the lights of their headlights and slowed down for a look haha. Nice looking cars if your on here :D

There is another one right around the corner of me with that same look also, but with a vertex looking kit all round. I love it.

SPEAK of the devil.... parked across from our property right now:

dsc00669fx4.jpg

SNAP!

oh i missed you dale obviously not in the 180 then :worship:

i spotted a white R33 turning onto sudholz rd about that time?? heading towards your brothers place spotted a silver R33 heading into the city azn driver no one i recognised

Actually sounds like my car. :worship: One of my many Woodville to city daily trips.

stand corrected :)

spotted matty 31... or at least think i did =P

yeah ya probably did more than once, been seein u a bit.............especially when working under R33s

spotted matty cruising hindley street at about 11 pm.

and was cruising next a nice dark coloured 32R (qld plates) down anzacs, driver was a cool bloke, gave it a bit of a boot.

hi dave, took me a minute to click who this hooded red wally was knockin on my window

oh i missed you dale obviously not in the 180 then :laugh:

i spotted a white R33 turning onto sudholz rd about that time?? heading towards your brothers place spotted a silver R33 heading into the city azn driver no one i recognised

I was in the Fairlane. When you when thru' that intersection i was next to you turning right (was about 20m behind that white 33). I was going to yell out to you but didn't want to distract you while you were going thru' the intersection.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...