Jump to content
SAU Community

Recommended Posts

Im wondering what you guys and girls think of this car as our investment.

Its a 2004 mercedes CLK 320 in Wine red.

33000 kms on the clock, full leather, Shaken until next year in June ( well inside the 1 year rule ) full service history, looks well maintained and is available for between 2.6 million and 2.9 million Yen which works out to around 27 to 29 thousand Oz.

I think thats very cheap for a car of this condition and with that low amount of kilometres.

Constructive comments only please.

http://page18.auctions.yahoo.co.jp/jp/auction/w20388127

i think that it should be ur daily driver.. and ur weekend car should be a wicked GTR of some kind :ninja:

not possible. We can only afford one and its either going to be that or if im lucky something along these lines...

http://page10.auctions.yahoo.co.jp/jp/auction/m50588261

The other thing too is that it will be worth much more than what i paid for it here, in Oz. Hence the benz or the bm.

I use the train to work every day anyway so id only have time to use the car on weekends and during holidays.

If i really need a speed fix ill buy a dunger drifter and thrash the rings out of it.

Edited by m3gtr

if you're gonna personal import something and invest money in it... make sure its:

a) unobtainable easily in australia

b) gonna command a higher price here than in japan (that's kinda easy, most of them do)

c) worth the hassle of importing

d) desirable enough to the australian public that they'll overlook the taboo of buying a grey/personal import.

anyone in the market for a merc or a beemer locally will just walk into a dealership and buy either of those.

gorgeous M3... maybe save a few more pennies and get one of those

ive seen one listed for 30k at a car yard in CarSensor magazine but the car didnt have any shaken ( vehicle inspection ) on it.

That made me think...why so cheap?

heres a dodgy phone pic...

post-33653-1203064226_thumb.jpg

if you're gonna personal import something and invest money in it... make sure its:

a) unobtainable easily in australia

b) gonna command a higher price here than in japan (that's kinda easy, most of them do)

c) worth the hassle of importing

d) desirable enough to the australian public that they'll overlook the taboo of buying a grey/personal import.

anyone in the market for a merc or a beemer locally will just walk into a dealership and buy either of those.

Ok...cool. Shan, so if i go by that logic, what kind of cars do you think would be along the lines you just mentioned? Because by my reasoning, why wouldnt someone want to save over 10 thousand on a car that is in better condition with much lower kays?

"a) unobtainable easily in australia"

..like an AMG merc for example?

Edited by m3gtr
You'll find a private import luxury like merc, bmw or porsche are given a wide berth by alot of local car yard and there arent alot of support around to sell,insure orfinance them..

sorry, im not sure i understand you.

Its not going to a car yard. It will be a private sale. I dont understand why someone wont insure them if it has been complianced in Australia? As for financing, again..im confused... would you care to elaborate?

sorry, im not sure i understand you.

Its not going to a car yard. It will be a private sale. I dont understand why someone wont insure them if it has been complianced in Australia? As for financing, again..im confused... would you care to elaborate?

You'll find that besides the fact that you there are BMW and merc dealerships in Australia, if you import one personally (even though its complied in Aus) insurance companies raise the insurance premium cause its now classified as an import, kinda like the r32 skylines, the local delivered skylines are cheaper to insure, even though are the exactly the same as the imported version but thats the way it is.

As for finance, most financial institutions wont offer a personal secured loan on a car that isnt physically here, even though you can prove that its on the way. The only way around this is an unsecured loan which you will pay a little extra in interest, or if you have a house draw againt the loan for that OR if you have the money sitting there doing nothing then you obviously dont have to worry about finance.

You find that if you have patience and dont mind doing the extra work, importing a car like this can literally save you thousands, but it isnt just a matter of paying the money and getting it here, there will be hick-ups alond the way. My old man just imported a Bayliner (a boat) from the USA, the amount of bullshit if he gone through to get it here (warfies are wankers) its been quite a headache, but in the end hes saved close to $50,000 so its worth it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...