Jump to content
SAU Community

Recommended Posts

I have a Nismo Pump, Nismo Fuel Reg,Highflow and a Z32 on the way.

Wanting 250rwkw...Should I do the injectors or max out the stock ones as I have been told it will work no problem?

My Gut tells me to get em but my wallet and wife says "Use the ones you've got"

Help!!!!! Is it too much of a risk???

Dave

Link to comment
https://www.sau.com.au/forums/topic/206634-r33gts-t-upgrades/
Share on other sites

def go injectors.

I upgraded to nismo 555cc injectors with my hi-flow set up. the standards were 90% duty cycle when giving it at the track.

got the 555cc's and max I have seen would be 60% with 235rwkw

Hmm thats what i thought but my tuner doesn't want me using them. Just nismo's 555 have certain issues, 740s are fine apparently. He said anything other then nismo 555's. Sards are too much stuffing around and not sure if tomei 555s are the same as nismo. I did have a reason, but forget at the moment. Will ask him again what the prob with them is....

Hmm thats what i thought but my tuner doesn't want me using them. Just nismo's 555 have certain issues, 740s are fine apparently. He said anything other then nismo 555's. Sards are too much stuffing around and not sure if tomei 555s are the same as nismo. I did have a reason, but forget at the moment. Will ask him again what the prob with them is....

555s have issues???? :teehee: Only the biggest and best tuning companies in the world use them not only on customers cars but their own cars.

Ive had them in my car for a year now,no complaints.

Yes i know this, that's why i'm asking the questions. Wish i could remember what he said to me lol, he explained a little problem they tended to have. Might be awkward rocking up with nismo 555s after he said not to haha. Dunno what to do?? Should i just buy em and say yeah i'm gonna run with 555s? Or go nismo 740s (i will have close to 300rwkw in the end)? :teehee:

Yer i know that but like i said, my tuner doesn't want me to run the 555s. Said i can run the 740s as they are different. Price is of no concern. Will have to call him up tommorrow and get the low down on the situation.....PM me if ya like to talk further :teehee:

  • 3 weeks later...

Getting excited now, have just sent turbo to be hiflowed... been told its getting a TO4 compressor and 56mm exhaust wheel, dunno what that means really but it sounded good....Bigger than whats in there I bet so thats a bonus.

Next are injectors then off to the dyno I go.

Dave

Edited by Turbo Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...