Jump to content
SAU Community

Recommended Posts

Hi guys.

Today i removed my engine (RB25DE), and allso my auto gearbox, but now i maybe have a little problem, because i go to 5 speed manual, then i need to remove my parkbrake pedal, to make som space for my clutch, it is noth legal to drive without parkbrake in Denmark, what can i do.!

post-46420-1203455144_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/206876-from-auto-box-to-manual/
Share on other sites

You need to install a standard handbrake from an R33 skyline. you will also need a bracket, the part number of which eludes me but i'm sure it's in the Manual Conversion thread. To use the central handbrake you need to get a manual centre console, or modify the auto one. it's not a quick and easy job converting, it took me a few months to get all the parts and convert everything.

Hi guys.

Today i removed my engine (RB25DE), and allso my auto gearbox, but now i maybe have a little problem, because i go to 5 speed manual, then i need to remove my parkbrake pedal, to make som space for my clutch, it is noth legal to drive without parkbrake in Denmark, what can i do.!

If that is your own private garage...I Envy you......

I still have the standard auto centre console in mine: my handbrake is mounted on an angle, but it is squeezed tight against the drivers seat: still works fine, just looks a little strange

If that is your own private garage...I Envy you......

Thanks mates.

My best mate own this garage/workshop, he import highpowered engines from Japan, and build them in to other Cars.

I will take a look at my R33 frontcut today, to find the standard handbrake, and try to build it in to my stag.

We started yesterday morning a 9 o'clock, at 12 the engine, gearbox, exhaust, pedals was out, lov airguns :-) Today we will put the new engine with gearbox, HKS cinter-metal clutch back in to the car, and in next weekend, new ECU, adjusting, and then i hope there will be 550 hp.

I will post some pictures later.

Have a nice day, and thanks.

post-46420-1203483966_thumb.jpg

post-46420-1203484020_thumb.jpg

Edited by Stagea Denmark
I want that motor!!!! Looks awsome.

Thanks. mate.

I found out, that there is 2 differend systems you can buy, a little electrical system, pulling the wire when you push a buttom, and another system called "Brake Lock system", normally you use this when you wanna warm you tires at dragstrip, it lock the frontwheels, you can allso mount this onyour rear wheels,i will buy one of those.

Edited by Stagea Denmark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...