Jump to content
SAU Community

Recommended Posts

Hi all, i want to lower my 33....

i need new shocks and was recommended to get Pedders Shockies....(GSR - was the model or something).....

anyway.....i dont want the ride too stiff...and i want to lower the car.....

so would i be best just gettin some pedders lowering springs with the shocks or what?

is there a better combination of springs (ie king's or another) and shocks (blistein, pedders, etc, etc..)?

so yeah, basically need some advice.....not too sure on coilovers as they can be a bit pricey...

any help or advice is welcome...

Cheers

Matt

Link to comment
https://www.sau.com.au/forums/topic/207470-wanting-to-lower-my-33advice-needed/
Share on other sites

please read this ... http://www.skylinesaustralia.com/forums/R3...ils-t85467.html

settings and so on are done by SK <--- not a mechanic but he sure knows his lines :laugh:

if you want a great daily and a capable track weapon get some of these

just stay away from super low suspension! i had king super lows in my old corolla for about 3 weeks before i took it out. handled twice as bad as stock.

i also had pedders sport rider suspension (or something like that). it was meant to be the equivalent of lows but it turned out that the springs were standard height.

my friend has the nismo tuned s15 and it handles beautifully. it absorbs all bumps as standard yet eats corners for breakfast :ermm: . are there any nismo springs (not coilovers) available for the r33? i have only had mine for about 2 weeks so i don't know that much about them yet

coilovers arnt that expensive?

i can justify spending abit over 1000 for them

if your not going to use your car for track then a cheap set will do ya

they handle much better and there adjustable, so you dont have to swap everything if you get defected

check the thread I posted above ...

its engineered to suit aussie road conditions :D

it height adjustable also!!!

swaybars make the biggest difference to your cars handling if you want your car to handle better the get some new sway bars if you just want it to look good then lower it.

+ everything in there is legal even the bushes and things :no:

best setup for your car if you are going to be using it mostly for a daily ;)

Edited by BLK33T

tien are good. but your paying for the name,

only good thing about them is you can get edfc thats if your lazy

i cant see why hsd cant do the same job

you can literally sit your can on the ground with them

still adjust the stiffness and camber.

I was told Pedders were shit... Yeah No Bull...

If ya get aftermarket shock, you are going to have a hard ass ride. My Cuscos are at the softest setting and still hard. Maybe which ever set of aftermarket suspension you get, make sure you can adjust the damping / Soft-Hardness I guess... :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...