Jump to content
SAU Community

Recommended Posts

Nice work, I intend on making on of these, my question is ; What else from around the house can I use to heat the perspex

$15 heat gun from bunnings, otherwise blowtorch & wrap the perspex in tinfoil to stop it burning

  • 2 weeks later...

toddlls idea isnt bad, but I found it was much easier seeing where the perspex was that I was melting.

BTW, I tried a normal hair drier and it didnt work :)

honestly, at bunnings I bought a cheapy heatgun for $12-15 bucks and it worked a charm. within 30 seconds it was almost like honey.

Gl with it.

Adam

  • 3 weeks later...
  • 7 months later...

your welcome guys,

also turael, i'll try to get some pics up over the next few days, cant believe its been in there for almost 2 years! But i can tell u now, run over it with a wet cloth and dry... still looks like the day i made it.... and I will prove very soon.... Not to mention i have taken it out to work on things and rested tools on it heaps of times!

Not a bad idea, the Perspex looks good. I made my own also, although I went a different way. Is yours actually fastened to the body? or just sort of slots into place?.

either way looks good, Top job.

I must say after 2 years it still looks great!

I was thinking of making a hole in the top and make a fibreglass tube from the snorkel into the top.

Will post pics when I'm done!

  • 4 weeks later...

OK first up i gotta say that the heatshield looks awesome.

BUT... I have to ask...

You used perspex to make it from (I guess it's good coz you can still see the pod somewhat), and you used a "heat gun" to shape the "heatshield"....in other words since perspex changes shape with heat, how hot does the engine bay have to get before it melts??

very hot dude, like yeh if u placed the pespex on the exhaust manifold it would melt... but if you look it up on wiki:

http://en.wikipedia.org/wiki/Poly(methyl_methacrylate) its melting point is 130-140 degs celcius

and the heat gun was direct heat, whereas you'll find the heatsheilds normally just suffer from indirect heat like heatsoak from a hot motor...

Adam >_<

  • 2 weeks later...

Im keen on doing something like this for summer, oh and wicked job btw.

Does anyone know of a more heat resistant material to use? maybe some aluminium sheet metal with heat sinks around lol.. a little over the top?

Also have you had any problems with police? or is it perfectly legal?

thanks.

If anyone has some air temperature sensing equipment I could borrow to give some results, or if someone can point me in the direction of where to buy one within the $200ish mark i'll get some results.

I bought a fairly cheap 'automotive' multimeter from dick smith ot radio parts a while back which also came with a K type thermocouple or what ever they are called. You can plug it in and run the wire to the air box etc. Unfortunately you don't get two sensors two compare at one time but you do get a multimeter out of it too. Maybe one of your mates wants one too and then you'd have two readings?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...